how to loosen the bolt on crank pully?

my friend has a 94 honda accord and is in the middle of fixing it and wants to know which way to turn the bolt to loosen it?

Anonymous2009-10-11T16:45:04Z

Favorite Answer

those particular bolts are very tight, they even make a special pulley holding tool to help remove it, usually you will need a very strong 1/2 inch impact gun. another way is to get a long breaker bar, set it under the car on the ground making sure no fingers are anywhere, then have someone crank the engine with the key, it should bust the bolt lose.
If you need any other info just email me gixxerscum@yahoo.com

10

Technobuff2009-10-11T21:03:31Z

Anticlockwise. The biggest problem is loosening it without the engine turning.
A rattle gun is one way. Otherwise, perhaps shocking the spanner or socket with a hammer might do it.
If all else fails, remove the starter motor and block it from turning with a large screwdriver or pinch/ pry bar engaged in the ring gear.
The rattle gun is the best way.

00

NightWalker2009-10-11T16:12:14Z

the opposite of the way the pully rotates

01

Sea Bass2009-10-11T16:31:18Z

counter clock wise. Its real tight and my need to be heated.

01

Related Questions

what is the easiest way to remove the crank pully bolt on a 1992 Acura Integra.?how do i loosen my harmony pully!!! please help?is the bolt on the crankshaft pully of a 1999 toyota avilon v6 a righthand or lefthand therd?How do you get the timing belt of a 2001 ford escort zx2 over the 2 cam sprockets, the crank sprocket,?How do i get my pully to come off?

Trending Questions

I ran a red light while driving and hit 2 cars. Will I have to go to court?21 answersCan I put a bag over my exhaust pipe?14 answersWhy can't most auto mechanics just be honest?15 answersCar starter works, but won't engage/turn over.  Do I have a bad connection?11 answersWhat can I do to properly fix a broken plastic headlight mount?8 answers