Why dose it keep blowing out the fuse?
On my 03 explorer it keeps blowing out the delay accersiores fuse why does it keep blowing up I just tried to change and as soon as I put the new in it blow it out why does it do this
On my 03 explorer it keeps blowing out the delay accersiores fuse why does it keep blowing up I just tried to change and as soon as I put the new in it blow it out why does it do this
Anonymous
Favorite Answer
is there an accessory plugged in the accessory socket?
sometimes accy. cables like phone or what not will not fit correctly or will fail and short the circuit and open the fuse.
Anonymous
because you do not provide a lot element, we ought to wager on the placement. the following is a definitive series of steps to attempt to isolate and perhaps settle on the placement: Unplug (and go away unplugged) each little thing—plus turn off all gentle switches—on the placement circuit and then reset the breaker. once you've effectively unplugged adequate issues, the breaker ought to stay to inform the tale. Plug units in a unmarried by utilizing one until eventually the circuit journeys off. At that element, unplug each little thing which didn't vacation the breaker and the finest gadget. Reset the breaker. Plug the finest gadget in back with no longer some thing else appropriate. If that journeys the breaker, there's a issue with the utilizing or gadget. If the breaker does no longer vacation, then the completed of all the units is more suitable than the circuit is rated for. bypass some to different circuits, or do without some—a minimum of concurrently. If the breaker gained't stay to inform the tale regardless of each little thing unplugged/became off, a wiring fault has got here about. evaluate contemporary activities: * perhaps a photo grow to be lately hung? A nail or screw keeping it will be shorting a cord in the wall. * some thing replace with plumbing? * Any contemporary carpentry artwork? * Has all and sundry crawled by potential of the attic or in the crawlspace lately? An inspection of what would have damaged the wiring is so as.
?
There is a short somewhere or something is drawing too much current. Most likely it's the former. You'll need an electrical wiring diagram of that circuit to troubleshoot this.
?
Too much power is getting to it check the whole wire as far up as possible if you can't find anything you might need to take it in.
?
check for shorts. get heavier wiring.