cylinder head bolts torque specs?

Favorite Answer

Go get a $20 shop manual from an auto parts store. Or maybe an online honda owners group may be able to help you....Show more

I was only able to find 2.3 L. Hope this helps

④ Step 1: 22 ft. lbs.
Step 2: Rotate 90 degrees
Step 3: Rotate 90 degrees
Step 4: If new bolt rotate
additional 90 degrees

8 6 2 4 10


9 3 1 5 7

(1 being in the middle and 9/7 being either side)...Show more

it is very important to get it right you will need to pop into honda agent or a garage and they have a data book that say,s torque needed oh you may need new bolts generally speaking the head torque sequence start to torque the middle and work out wards...Show more

Cylinder head bolts are torque to yield, you should be using new bolts. Step 1: 22 ft-lb. Step 2: 52 ft-lb. Step 3: 90 degrees from starting point. Looking at the head: Upper row of bolts, second one from the left is #1 Lower row of bolts, third one from the left is #2 Upper row of bolts, third one from the left is #3 Lower row of bolts, second one from the left is #4 Upper row of bolts, first one in the row is #5 Lower row of bolts, first one in the row is #6 Upper row of bolts, last one in the row is #7 Lower row of bolts, last one in the row is #8 Keep in mind, the upper row of bolts are the ones that are under the valve cover (closest to the intake side of the head)and the lower row of bolts are by the exhaust ports on the head. Good Luck.......Show more

yep i always consult the book when it comes to that ..so many cars of different kind..and i'm not a mechanic for pro but a body tech ..sorry...Show more