can i get my car chassis pulled?

my cars chassis is bent right where the front passenger side control arm is connected to.(the control arm is right on top of it). its bent downward towards the ground and also a little bit in towards the car and this caused the front right part of the cars chassis to get pulled back a little, which is causing the traction rod/tension strut/whatever u wanna call it to push the control arm back and the whole assembly is sitting too far back in the wheel well. does anyone know if this type of damage can be pulled or bent back by a shop?

this happened because the car under steered and i hit a curb on the right side. the control arm needs to be replaced because the bushing is destroyed and the whole thing is bent slightly

Anonymous2012-08-17T21:55:11Z

Favorite Answer

needs to be inspected at panel ,chassis shop

10

Anonymous2016-12-08T21:15:34Z

employing a chassis physique straightener it must be performed yet expenditures are to plenty. If I have been to signify employing a come-alongside to crank it till from is back in perfect place whilst tying off one area to a tree and merely positioned the emergency wreck on. plenty greater cost-effective and works fairly reliable as that's what some shade tree mechanics might do.

00

Related Questions

Can i get my car chassis pulled?Would my car pull a horse trailer?what is the impact of car chassis on the handling of a car?Hit the curb while making u-turn, car now pulls to the right?Car pulls to the right as I accelerate & shakes along with the shifter?

Trending Questions

I ran a red light while driving and hit 2 cars. Will I have to go to court?17 answersWhy can't most auto mechanics just be honest?14 answersCan I put a bag over my exhaust pipe?12 answersCar starter works, but won't engage/turn over.  Do I have a bad connection?10 answersService break assist?8 answers