I have a 1999 Dodge Neon 2.0 my plugs are not getting any spark but I have hot wire going in the three way plug at the coil pack. when I turn it over the coil leads or hot but I still do not get any spark. The crank and cam sensors tested OK. The coil pack is new. the coil pack is getting a good 12 v when I turn it over but still no spark at plugs. Is there anyone out their that can help me with this car? Thank you
ChrisAds
You need an OBD scan tool to check if the ECU sees an RPM signal from the crank sensor, thats a good start ! crank and cam sensors may have been tested ok but is the ECU seeing the signals from them, could be bad connection or broken wire.
Winged-Assassin
Attention some of you "Mechanics" This car DOES NOT HAVE A DISTRIBUTOR. You guys need to post advice somewhere else!!!! I agree that a true diagnostic test of ALL sensors and ECU or PCM must be done. This is a very simple diagnosis if you have the proper person with the proper tool and experience to perform this task. Bring it to Maine, Ill have it fixed in less than an hour!!!
bandit_60
did you check the module ? if there is juice at the coil then maybe it,s not putting out to the distributor ! if the distributor is getting juice then maybe you have a bad cap and rotor !
Anonymous
Google "how to test a coil"