Has anyone ever heard of lead used as a sheath on electric cable (romex)?
I was rewiring an old house and came upon what I thought was some type NM cable (the most common brand name is Romex). Actually, it has two conductors with old fabric-wrapped insulation that cracks and falls apart when I touch it. That whole setup is encased in lead where in modern NM cable there is a vinyl jacket. Yes, grey, metallic LEAD--I couldn't believe it. Anybody ever heard of this?
Jim W2019-10-06T17:59:17Z
It was used for extra protection against damage by rodents and physical damage. More expensive than knob and tube but easier to install 2 conductors in one run. Most likely pre WW2 but late 30's for a time period.
Yeah, hell yes. The telephone cables for entire communities were lead sheathed and the individual copper conductors were paper or wood pulp wrapped. These are still functioning direct current cables in use for telecommunications. Prior to what you have, the wires were similarly insulated, but always separated with porcelain knobs and porcelain tubes (where they passed through studs.) You have a rare experiment in home wiring at much higher ac voltage than telephony still uses, get rid of it.
UK answer. Lead sheathed cable as you have described was commonly used in domestic installations from the 1900s upto the 1940s and the lead sheath was often used for earthing / grounding. During my working life I have worked in / rewired many properties that were wired in this this type of cable before all rubber sheathed , TRS / Romex type cable, became more popular upto the 1960s, probably due to cost considerations..As you have said the rubber insulation perished and became brittle with with age and this was often the reason for replacing both types with PVC insulated cable.
Lead was indeed used a long time ago because it is relatively flexible. That was before we realised how dangerous lead can be. It was also used in domestic water pipes. You may still come across is in very old systems.