Is there something wrong with my fuze box?

Question

My break lights work but not my tail lights. I thought maybe it's a blown fuze. So I replaced the 15 blue ones. 
The tail lights still don't work. Does my fuze box look right lol I'm no expert. Don't have a manualIt's a Chrysler voyager

Jackolantern · Accepted Answer

You need to test all the fuses, both sides of each fuses, until you find one that's out.

Anonymous · Answer

You need to get an index for your fuse box.  Check the taillight fuse.  There could be a problem with your headlight switch or the connector at the headlight switch or the wiring, or all your tsillights are burned out.

While a fuse is always a good place to start checking, a fuse does not normally just fail for no reason.

Sometimes thete is a trailer wiring harness that is making problems.

White Lives Matter · Answer

Use a wiring diagram and trace it back.

thebax2006 · Answer

You're supposed to take a bulb out to see if it has a blown filament in it. It's likely you could have 2 blown tail lights. Why replace all the fuses when you can just look at them to see if they are bad or not?

Rick · Answer

two different circuits, probably a bad wiring connection plug ...........

Is there something wrong with my fuze box?

Trending Questions