Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and the Yahoo Answers website is now in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.

Trending News

Promoted
?
Lv 6
? asked in Cars & TransportationMaintenance & Repairs · 9 years ago

Transmission won't up-shift?

My Chrysler Cirrus V-6 won't upshift. I pulled the pan and found no metal or debri

so I put a new filter and filled with ATF+4 to proper level and it still will not upshift...

I was hoping someone had the same symptoms with a cure... Thanks in advance..

Update:

Ok now that I know it is a Chrysler and has a TCM, (Trans Control Module) so the shift is

Controlled by electronic means and unless your input is constructive please do not ans.

4 Answers

Relevance
  • KMA
    Lv 6
    9 years ago
    Favorite Answer

    First thing I would look at would be the Vacuum Modulator and then line attached to it. Then I would look at the linkage and be sure it wasn't loose. Then I would call local transmission shops and see if anyone could/would give me any information over the phone.

    If you are able to solve your problem that way please consider driving to the shop that helped you over the phone and give them a Big Tip!

    Good luck!

    Source(s): Had the same problem on a Plymouth sedan years ago.
  • anthentherwasi
    Lv 6
    9 years ago

    Its a chrysler i had sebring transmission go out at 40k miles. it had no metal in the pan either

  • texas.realtor
    9 years ago

    It could just be a vacuum line has popped off. Did the old fluid smell burnt and was it dark? If so, it may be time for a tranny rebuild.

  • Anonymous
    9 years ago

    There's the answer!!!!

    It's a Chrysler automatic!!!!

    Source(s): My knowledge
Still have questions? Get your answers by asking now.