Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and the Yahoo Answers website is now in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
2015 GMC Sierra?
I have a 2015 GMC Sierra that the left headlight is not working. I put a new bulb and fuses are good but the headlight is still not working. Any suggestions as of why it's not working? Thank you in advance.
7 Answers
- (A)Lv 75 months ago
Must have a poor ground connection on the body of the truck.Loosen ,move around and retighten.Could also be a bad bulb holder electrical connection.
- CactiJoeLv 711 months ago
Need to use your multimeter (voltmeter) and check for voltage. Might be the ground wire is boogered up near the headlight. Small black wire screwed or bolted to some metal.
- 11 months ago
Check the fuses and relays. That's where I would start. If that's all good then look at the plug that connects to the lights and make sure none of the wires are loosened out of the plug end, and trace the loom of wires back to make sure it's not cut somewhere. It could be, possibly, that the connection itself is burned up. You may be able to tell if you unplug the light bulb and smell the plug. If it smells like burnt plastic or burnt electrical then that is likely the issue. If so, you'd have to replace the plug.
- thebax2006Lv 711 months ago
If you have regular HID headlights try running a new ground wire to the headlight harness at the connector for the headlight.
Source(s): Mitsubishi Master Tech - eyecue_twoLv 711 months ago
Check the socket and all the wiring to the socket. Look for corrosion or signs of heating like melted plastic.
- Anonymous11 months ago
Get a test light and T-pins and check for power and ground at the headlight connector with the switch ON. Determine if there is a power or ground issue. It is likely a bad ground if both high beams and low beams are not working. If the connector have "green crusties", replace the connector. Good luck.