John R

Hi I have a 2003 Chevy avalanche and while In The process of installing logo projectors Into my doors my courtesy lights on my doors went out. They went out and stop sending power as soon as I removed the door panel to modify the doors. The wires N everything are still intact. And the bulb went out as soon as I removed the panel. Same for my driver side. I didn't pull any wiring so wtf. I spliced into the wires for the projectors to see if it was bad wiring but nothing. not even where the door lamp, i swapped the bulb with different leds and bulbs but does t get currant but my back doors do. I'm very impatient so I need so help ASAP before I break this ******* phone. Thanks.

I'm 17, 6'0 and I drive. I have gauges 7/8 and a labret, I'm looking for job I dot really care what but I don't know we're to go. I live in Houston Texas, and I mean I've applied at jack in the box and and other places like that, so I mean i don't know where else to go.

i have a p2300dvd pioneer stereo in my 2003 chevy avalanche, and i have to use DIVX to convert my videos, i convert them to the lowest resolution avaliable which happens to be 320x240. would iy at least be able to play files converted to at least 720x576?

I recently traded my car frame for a 2001 RM-125 with a 145cc 2 stroke motor. I don't have the tittle. But it has the vin. I was wondering a lot of things about this bike, like can I drive it without a plate? Would I get pulled over? How can I get my tittle? I'm located in Houston. Texas.

I have 2 brand new kicker CVR's. They are the 07 model and I wanted to know what is the max wattage of amp I could use to power them, weather it be mono block or two channel. Can someone help?

I got two brand new kicker CVRs. And I have a 1200 watt 2 channel. I have the connection bridged and my fuses keep blowing out. The fuse is a 25. Do I need a bigger fuse? Or what's going on?

A friend of mine is giving me his headers but they are for a 98Toyota corolla, and I wanted to know if they would fit in my 95 Honda accord.

I have a 1995 Honda accord LX, I have 17's 225/45 tires, I am going to buy eibach, coil overs, or springs, I was wondering do I need thinner tiers for the drop? Idk tires like 205/40? Or will the ones I have do? I was thinking of a 2 or 3 inch drop

I have the Nitro 1200 watt BMWx 484 2 ch bridge able amp. I have 8, 6x9's Nitro as well. Each 6x9 is 800 watt peak power. I was going to connecting the 1200 watt to 4 of my 6x9's. And I was going to connect an 800 watt 4 channel bring able amp to the other 4. I was wondering if the nitro amp would keep the 4 other nitro 6x9's from blowing out.

Hey there, I recently had a truck crew, being as the leader I had my truck all the time. Trans blew up, anyway I started a tuner division in my crew. I have always liked tuners just never had one. Bought a 95 accord LX, standard with a 4cly 2.2. I'm know my way around the motor just not sure what specific parts to get. I know I can get a turbo and run on low psi levels but what else can I do to get a bit more power out my motor. Other than a motor swap to a V-tec or H22 motor, do headers help? Does a new exhaust really do anything? Intake? Need help from a tuner not a ricer!

Want to make my 1995 Honda accord door and back speakers to sound better. I have a different stereo and pioneer speakers that I replaced the stocks with but, they kinda still sounds the same as it did with my stocks. What can I dO to fix it.

I bought some 17's with 225/45r17. The stocks are 185/65r14. I tried to The 17's, and they fit in the front perfect, but they don't fit in the back due to the spring or some crap like that. The tires presses against it. What can I do, to make them fit? Or what profile tires do. Need?

My girlfriend and I had sex as usual and she is complaining how it hurts when she pees. The doctor said it could be bacteria, but he didn't check, it was just an suggestion. Is it anything serious.

Hi, I have a 1970 ford F100 vintage. But someone tried to brake onto it. And I've called a few window replacement places and noone can do it. Anyone know a place were I can replace my driver side window in Houston? Or Phone number? Thanx

My lights keep dimming everything stays on and everything works. The signal lights work when my headlights are off but when I switch them on then my signal lights don't. I don't know can you helP?

It's a 1970 ford F100 302 V8 all original parts

i just changed my alternator on my 1970 ford f100 and i mean the turning signals are a bit dim. when i start the truck it sounds fine but if i turn on the lights, everything dims a little. the signal lights work when the lights are off but when the lights are on the don't work. can someone help me?

Hi, i have a ford f-100 with original motor and original interior. Basically its vintage but i want to add some performance, i was wondering if anyone knew how to boost up the horse power or give a bit speed. i mean its just for cruising but just incase someone wants to be a lil hard a** on the freeway i can show them what a real truck can do lol. So can someone help me out? im still learning about performane parts

I have a 2003 avalanche, its a show truck and I am trying to find a shop to drop it. Please post stupid replays about why I'm dropping my avalanche. I have two and the other one is a 4x4 lifted so I want to drop the other one. No questions just let me know where I can drop it kinda cheap or at least fair price. Thanx

Hi, I have a 2003 avalanche and the stock mufflers suck and a buddy of mine told me to get 44 series flowmaster straight pipes, I'm putting in some new headers but the exhaust is what I'm confused about can someone help me out?

I'm the leader a big truck crew, and well I drive 2003 avalanche and money is a bit tight, I hear you can drill holes in the muffler to make it loud, but does it affect anything? I also been told it keeps water from filling up ur muffler. So is it safe? And does it affect my HP or torque?