Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
joystoy33
96 MustangGt..Miles or trip meter not working..?
I stated this before..Its miles and trip meter not working...Speed odometer working fine.
1 AnswerMaintenance & Repairs8 years agoMileage and odometer not working on 96 GT?
Not sure if its electronic or not.Would like to know the miles I travel.My nephew has a 98 GT and it is the same.Hope someone has ran into this problem and got it fixed without replacing panel.
2 AnswersMaintenance & Repairs8 years agoCelica dies out on take off.?
Yesterday I was about to take off and the car just sat there.Putting in the clutch would bring it back to life.It would not completely shut off.It just bogged out and sat there.Toyota says its probably in the v v t i or v v t l .They say throw away that motor and get a plain GT. This has happened several times in the last few months.It never shuts down.The car just has 94,000 miles on it.What gives?
3 AnswersToyota10 years agoDoes a 2000 Celica GTS have an idle sensor?
My Celica sometimes stalls like its running out of gas.It want shut down but it feels like its going to.Toyota told me that it doesn't have an inline filter so I'm at a standstill right now and they are not open today.If any of you have had this problem and know of a fix;I surely would appreciate it.Thanks
2 AnswersMaintenance & Repairs1 decade agoSludge in Celica GTS engine?
Ok;I've got a 2000 Celica GTS.Dealership says V V TL port is clogged and there's hardly any way to fix this problem.I've been told by several people (not certified) different ways of cleaning the sludge out.This is a 2zz engine and it want perform like it needs to unless this is done.The v v ti valve has been replaced.Just wondering if anyone has had this problem and how they might have had it fixed.Toyota told me I could try synthetic oil but be prepared to have oil leaks.Any other suggestions?
6 AnswersToyota1 decade agoOctane level on Toyota Celica?
Just bought a 2000 GTS 2zz.Just wondering if it came out using reg.gas or prem.The gas door has been replaced so I'm not sure.Thanks for any help.
2 AnswersMaintenance & Repairs1 decade agoCheck engine light on a Toyota Celica?
I have a 2000 Celica with less than 100k. Check engine is on.Code on the computer says its the converter.I've also heard that it could be one of the oxygen sensors.I'm not up to date on a Toyota.Seems like low miles to have to replace a converter.What do you Toyota buffs think?
2 AnswersMaintenance & Repairs1 decade ago1500 Kawasaki Power Commander?
Just bought a 2000fi power commander.Kinda wondering if anyone has installed one on the same kind of bike and remembers the settings. Thanks
1 AnswerMotorcycles1 decade agoGauges on 1994 Mazda Miata?
Got in the car and temp gauge;oil pressure gauge and turn signals not working.Have a feeling its the computer.Need a little help please
3 AnswersMaintenance & Repairs1 decade agoWhat engine or how can you look on plate to find engine size for 1964 Ply.Sports Fury?
A friend of mine is restoring a 64 Sports Fury.He doesn't have the motor.There is a way you can look on the plate either on the door or somewhere on the frame.If you know what you are looking for;you can find out the size motor it has.Or so they say.Any help would be appreciated.
2 AnswersMaintenance & Repairs1 decade agoWhy does Miata ping only when warms up?
94 Miata wants to knock a little after it warms up.It jumped time a few weeks back and I put some miles on it while it was out of time.Timing was set dead on time but after it's drivin a while it starts to ping.Annoying as hell.Some say it is injectors.I dont know if it has a knock sensor or even if thats it.Just wondering if anyone has run into this problem or possibly knows the cure.Thanks.
1 AnswerMaintenance & Repairs1 decade agoHow to get air out of brake lines.?
I put a master cylendar on a 98 Sunfire.Couldn't bench bleed it so its got air in the lines.The pedal want even begin to pump up.This thing has an abs system attached to it.Was wondering if I could get rid of some air and possibly get at least some pedal by bleeding the two bleeders on the abs. Thanks
4 AnswersMaintenance & Repairs1 decade agoHow to silence power steering noise on Ford Ranger?
I know the small trucks and mini vans made by Ford have a lot of noise coming from the power steering box.I've also been told that different additives can quiet them down.I'd just like to hear about some of them. Thanks
6 AnswersMaintenance & Repairs1 decade agoHarley Sportster (How to lube transmission?)?
My friends Harley has a loud and getting louder gear.I've heard the five speeds are bad for that.He's never added fluid and doesnt know where to.I have mine done at the dealer so I couldnt help him.He's tight so he'll do it himself.Any help out there would be appreciated.
3 AnswersMotorcycles1 decade agoUpdate on Ranger Clutch?
As I cant find a dealer with enough time to see me now;I still have a question.When the weather is cool in the morning the truck shifts good.It's only in the evening when it's hot that the gears lock up.We started to bleed the fluid but its full and doubtful it has air in the line.Wonder if maybe the adjustment is slipping after it gets hot.This truck works too good to have a major problem.I cant get it in to dealer till Wed; so maybe someone has had the same problem before.The clutch releases about half way so it's not wore out.No vibrations when it's released.Just after driving 45 minutes in town it starts to freeze up.Not wanting to go into gear.Who has the magic answer.Ford haters stay out of it.I dont make fun of your choice of car or truck.
1 AnswerMaintenance & Repairs1 decade agoClutch or shifter on Ford Ranger?
I have a 99 ford ranger.When I stopped to back in the driveway the gears locked up.I cut the truck off and it shifted fine.I thought maybe the leavers or linkage could be locking up until I shut it off and shifted. It doesn't have a reservoir under the hood.Seems like it does good when cold but when I took it out and drove for a while;it happened again.Thanks in advance for your input.
2 AnswersMaintenance & Repairs1 decade ago1999 Ranger 2.5 with a miss?
I wrote yesterday about a friend with a miss in his 2.5.He said the miss started just before he had it tuned up.I agreed that it might possibly be in the wires.but asked him today and he said the wires were replaced too.The check engine light came on before the tuneup.His friend (a mechanic) put the new plugs and wires on it and said it also needed sensors to put out the light.: and it still has a slight miss.If you hit the gas hard it's gone.Just when you're at a breaking speed you can feel it.I told him to go to Ford and let them scope it.He said he had confidence in one of you possibly having problem like that or simlar to it.He just doesn't have the money to pay ford.Thanks for your help.
2 AnswersMaintenance & Repairs1 decade agoFinding a miss in Ford Ranger?
A friend has a 99 ranger 2.5 and it has a miss out on the road.It's not bad but noticable.He said he noticed it a while back and put new plugs in it and some kind of censor.You cant feel the miss while its idling.Any ideas? Thanks
4 AnswersMaintenance & Repairs1 decade agoWhy Mothers drive cars?
I know this is not a question and is in the wrong place but I just wanted to say Happy Mothers Day to all the mothers out there.
5 AnswersOther - Cars & Transportation1 decade ago99 Toyoto Camry>>Vibration in rear?
Okay here goes.Got a vibration in rear.Feels like a tire out of balance.Got all four speed balanced yesterday and it still vibrates.Even rotated tires and had a front and rear alignment.What else could it be?Anyone else had this problem with a 98-2000?Any help appreciated.
4 AnswersToyota1 decade ago