Jason J

Hello

Actually i do know what a molex connector is in my PC. They give power.

I have just built my pc but im having a few connection issues,

But.... What is the difference between the black molex connector thats connected to my power pack, and the white molex connectors that i have bought. I bought a 4 Link SATA power supply for HDD. The main power connector is white.

Can i connect this white power connector to a black power connector from my power pack?

Why do they come in different colours?

Also, in my Gigabyte Aurora case, i have a front fan that does not work at all. Its supposed to keep my HDD's cool.

I see that there white molex power connectors coming out from front panel area, what are they for? Is the molex for the fan?

if someone can just give some advice as to these for me it could help.

I have no other issues.

many thanks.

Its a simple question. The Police would say it has a simple answer. They would say, because its against the Law. Being against the Law dont necessarily make it wrong. Of course many things against the Law are morally wrong. But im not addressing those. Im addressing this.

Its wrong cus we are told not to do it by a bunch of MP's? Or court Judges?

I myself do not and have never paid for sex. Im simply trying to form a debate on this subject. And im interested to know and learn about the answers.

Its important lastly, to know that the woman (or man) receiving the money is not at fault. Its the person that pays the other for the sex is at fault. Other countries allow it.

So whats the reason and logic that UK does not?

Please read carefully

I have a WMV file. Im editing in Premiere CS3.

I wanted to cut out some of the movie that was not needed.

I used the Razor tool. Afterwich i then sent the whole project straight to the Media Encoder for render.

But when i rendered it, i had a message at the end of render, saying that there was a missing frame. I was asked without any option to click ... OK

Then wen i tried to load the completed rendered movie into Nero 8 ultra, it wont load. Saying that it cannot be loaded.

Is this something to do with the fact that i used the Razor tool? After i used the tool, i didnt do anything to remove the Razor tool slice marks. Therefore i have 3 separate sections in one movie. Does this cause the render process to fault?

if not does someone know wot ive done wrong?

And how cud i remove the Razor tool slice marks from the Timeline, therefore showing one long movie section. (for future reference)

Many thanks.

Please read carefully

I have a WMV file. Im editing in Premiere CS3.

I wanted to cut out some of the movie that was not needed.

I used the Razor tool. Afterwich i then sent the whole project straight to the Media Encoder for render.

But when i rendered it, i had a message at the end of render, saying that there was a missing frame. I was asked without any option to click ... OK

Then wen i tried to load the completed rendered movie into Nero 8 ultra, it wont load. Saying that it cannot be loaded.

Is this something to do with the fact that i used the Razor tool? After i used the tool, i didnt do anything to remove the Razor tool slice marks. Therefore i have 3 separate sections in one movie. Does this cause the render process to fault?

if not does someone know wot ive done wrong?

And how cud i remove the Razor tool slice marks from the Timeline, therefore showing one long movie section. (for future reference)

Many thanks.

I have fotos in a folder.

I cannot rotate them becuase they are read only.

When i go to properties, and deselect read only, i click apply and ok..

then wen i try to rotate again the foto.. it wont. I check the properties again and the read only is selected again.

Why? How can i make the folder without read only?

thanks.

ive just reinstalled XP and windows. Then added my audio driver.

But i have no sound. Whats wrong?

did i install my audio driver at the wrong time?

thanks

Im running XP. Windows 2003.

When i turn on PC every morning it has a white screen. The white screen is there as soon as i push start on the CPU. So as far as i know its not a problem with the windows or XP loading up properly.

I can hear the Windows kicking in and hear scanner warming up, I have also checked the VDU and all connections seem ok. Ive looked inside the CPU for any loose connections but all seems ok. So there is something happening that i dont understand.

Last night i formated my C Drive and reinstalled XP and Windows cus i thought it maybe a virus. But beleive it or not. The white screen is there this morning... when i boot up.

Sometimes i have to push restart on CPU 3 or 4 times to get it to run properly without the white screen appearing at all.

Whats going on? Why am i getting this white screen? What can i do to stop it from happening?

Its only happened over the past week or so.

I am creating a website that sells items for children.

My idea is that I import from the Philippines the items I need. But my problem is, how do I locate a reliable trustworthy supplier of the items I require for my website?

Who can I speak to in the UK that knows how to contact a supplier of goods that need?

I dont know anybody in the Philippines but I do know the items exsist there as I have been to Manila many times.

Im simply looking for UK help to start the job of locating a good supplier.

Anybody know who I can speak to in order to be put in touch with a Company or person that is able to help to locate a Business in Philippines (anywhere in Philippines) that can supply goods?

I know its complicated. But I have to start somewhere!

thanks for reading.

I have made a small project using photographs over a music track. I used Adobe Premiere Pro CS3. I used the transitions in Prem Pro.

I saved the project and then opened up the saved Premiere project in Adobe After Effects CS4 for rendering etc.

But when I opened the project using After Effects CS4 it would not play the transitions that i made in Prem Pro.

So After effects does not recognise any of the transitions used in Prem Pro CS3? The transitions show in the timeline properly. But do not appear when i play the track. I simply have photos opening and closing when playing through the track.

No transitions at all. Why not? Whats wrong? Is it normal for the transitions to be ignored?

Do i have to make my own transitions using after effects?

hope someone can help.

I have made a small project using photographs over a music track. I used Adobe Premiere Pro CS3. I used the transitions in Prem Pro.

I saved the project and then opened up the saved Premiere project in Adobe After Effects CS4 for rendering etc.

But when I opened the project using After Effects CS4 it would not play the transitions that i made in Prem Pro.

So After effects does not recognise any of the transitions used in Prem Pro CS3? The transitions show in the timeline properly. But do not appear when i play the track. I simply have photos opening and closing when playing through the track.

No transitions at all. Why not? Whats wrong? Is it normal for the transitions to be ignored?

Do i have to make my own transitions using after effects?

hope someone can help.

I have a rectangular stone shower tray. I intend to install myself.

It will be installed upstairs in my bathroom, on a wood floor. Obviously a supported wood floor.

I have found out how to install the stone shower tray onto the wood floor. But i have also found out that i will need Marine Plywood layed down then the cement goes onto the Marine ply then the tray lays on top.

My question is, can i use normal 18mm ply? Or does it have to be Marine Ply? If it has to be Marine Ply, then why? If i cant use normal ply ..say .. .Brazilian 18mm .. then why cant i?

i hope someone can help with this.

I want to install a new shower basin. I have not purchased yet.

I dont know whether to buy the resin shower basin or the stone shower basin. My upstairs bathroom floor is wood floor on rafters as is usualy the case.

Can i install a stone shower basin onto this wood floor? Are there any rules that i should not?

How would i raise the basin from the floor so i can avoid some central heating piping along a wall? Should i use feet for the stone basin? Or better to build a wood frame from 2x2. ?

hope i can get a constructive answer...

thanks.

What is a Kabayan? I am trying to send money to my gf in Philippines. She has gone to her bank and asked them how i can put money into her bank account.

But her bank does not deal direct with my UK barclays bank.

So her bank suggest to use a Kabayan. What is a Kabayan? Is it a loan that she will take and i pay back? Or what is it?

Ive tried to look online but i cannot really understand it. Western Union exchange rate is so low and the fee is high.

can some one help me with this?

thanks

I have a friend that has SMS via yahoo on her mobile. How is it she knows if im online when im signed in as invisible?

i thought that if im invisible nobody can see me. Correct?

so how does she know im online if im invisible?

She knows im there cus everytime i sign in, i get a message from her. at the time i sign in. Its logged the same time... i dont mind cus she is my friend. . But as i said, i thought invisible meant,,invisible

anybody know?

Im making a webpage. Im using Div tags. DreamWeaver CS4.

Ive made my page and all is fine. Except when i changed the background colour on my 'topnav' Div. After i changed the colour i could see the underlying 'wrapper' div showing between the 'topnav' and the 'banner' div's.

When i disabled the colour i chose to begin with the gap is still there. Its permanent now. I know its the underlying 'wrapper' Div cus of the wrapper colour. I have looked inside the wrapper div edit menu, the topnav menu and the banner menu.

I cannot see anything obvious so any ideas? This problem is holding me up now...

thanks...

I am trying to make a webpage that uses a spry dropdown menu. (i use dreamweaver CS4)

i already have a banner that i made using PS CS4. I imported the banner into Dreamweaver (800 pxs long)

When i make a spry dropdown menu it asked me my size of the buttons. I have 5 buttons. But whatever size i decide to make them, they are not the same size as the banner ()5 buttons the same length as my banner). If I choose pixels for my button size, then they ALL grow and move off the page (wrap) so if i choose 800 pixels same as my banner then they individually become 800 long and thats not right is it.

so whats wrong? what is the 'em' measurement that i see with the default spry button selection?

how can i make my dropdown menu bar the same length as my banner?

hope someone knows!

ok, ive asked this question once or twice before on Yahoo answers.

why cant i capture, or even SEE my camcorder on my PC?

Ive built my own PC, i obviously have a graphics card or else i wouldnt see this screen as im typing now. I have a card in the back of my PC with firewire connection. But i still cannot see any video at all.

Am i missing something? Do i need something else? a video capture device of some sort? what is it? how much are they?

Im going loopy trying to work it out myself without paying some extortionate PC repair shop to charge my £50 to do something that i could probably do myself for about £10.

but ive read help sights, and asked other people but i cant work it out.

If i have a firewire connection, why do i need anything else?

what the hell is going on with my PC? its the reason i built it .. to capture my camcorder!

hope someone can help me here...

thanks

i always have the history full of sites ive visited and used for business.

i have to manualy erase them at the end of each day. Isnt there a way of disabling Google Chrome history?

I just love the looks and sounds of the Noisettes. Im going to see them in Cardiff on the 15th October.

But im wondering, what is the real name of the lead singer?

I cant find it anywhere.

ive looked on the net for a UK version of hanging a hardwood front door. But i cannot find one.

Ive prepared the door myself, stripping, primed, hinged, letter box etc.

But i dont know how to hang it into an existing frame. I have an aluminium door that i will remove.

How do make sure the door is going to be a tight fit without hitting the frame?

My hardwood door is a few millimetres wider than the frame, how can i make sure i dont take off too much wood when i plane it? (any tips)

How do i know where to put screw the hinges onto the frame so the door sits nicely onto the frame and dosnt hit the pieces of wood (cant remember their name!) that goes arround the frame and holds the door in place?

hope someone can help.