jamie h

I have a 2002 jeep grand cherokee with the 4.7 ltr motor. It has the hydraulic cooling fan with a 3 pin electrical connector. My question is can the electric cooling fan assembly from the same year model be installed in its place? I need to know if the voltage coming from the connector is the same for both fans, and if there will be a check engine light if I am able to make the swap.

Can you swap a 3 pin cooling fan in a 2002 jeep grand cherokee with a 2 pin fan? It has a 4.7 with the towing package, and I can't find the 3 pin fan for it.

I have a 2002 jeep grand cherokee, with the 4.7 and a towing package. My cooling fan only turns on when I first start it, but pulls very little air. Where can I find another fan that has the 3 pin connector, or is it possible to wire in the 2 pin connector fan?

Can a flat piece of copper run against a magnet, and still produce electricity?

I have a 2005 nissan sentra that has an a/c problem. It works while I am driving, but as soon as I slow to a stop, the compressor kicks out. I am sure it is the secondary cooling fan. Is it possible to put a jumper wire in line at the secondary fan to see if the a/c works at an idle?

I have looked all over the internet, and I can't seem to find out any info on this brand of sewing machine.

Does any one know where to get a vacuum diagram for a 1979 302 engine?

Does anyone know where to find the cornering lamp assembly (with the amber lens) for a 1977 pontiac lemans sport?

For all of the people who possess high performance car knowledge.

I have recently acquired a 1969 gto judge with a 400 motor. The previous owner in his quest for extreme speed felt the compelling urge to shove a blower through the hood of this car. I feel this is an abuse to such a beautiful vehicle. What I am looking to do is remove the blower, and either replace it with a twin turbo setup, or super charger. Which one will give the higher horse power. Also, the transmission needs to be upgraded to handle the torque. I need an idea as to which would be the best one to have installed. And lastly, would I benefit from having an inter cooler installed, or would that be a waste?

I will be returning the car back to its factory original interior/exterior, and am only looking to upgrade the drive train. It will not be driven in any competitions, but more used as my weekend driver, or for show.

One more little detail, the engine is carb, not fuel injected. But could be switched if necessary.

I would like the engine to be at the 600 hp marker if that is of any use.

I will not be doing the work on the car myself, as that is what we have mechanics for. I just need a little knowledge as to which items to purchase before it goes to the shop.

Thanks for any help you can give.

If I am upgrading the ram in my computer(Emachines e series) will it cause any problems upgrading from a ddr2 pc 5300 to ddr2 pc 6400, or 8500? I am not using it for gaming, just for multitasking in my home office.Currently I experience alot of bogging down with my system.

Please don,t suggest an antivirus, system defrag etc... as this is not the problem.