NORMAN Z

How long will it last at 30 psi and an airbrush consumption of 1.25L per minute?

1.34 cubic feet of compressed air

30 psi

1.25L consumption rate per minute

Thank you!

30 psi at a steady discharge rate from a 10 gallon portable air tank. I would like to try to use it intermittently with an airbrush.

I have room that is 20x14x10, 600 sq ft. I want to heat/cool it with a through the wall split system. The room walls have R15 and the ceiling has R30 insulation. Can you tell me how many BTU system I need for this purpose? (Michigan)

Thank you

I have room that is 20x14x10, 600 sq ft. I want to heat/cool it with a through the wall split system. The room walls have R15 and the ceiling has R30 insulation. Can you tell me how many BTU system I need for this purpose? (Michigan)

Thank you

I want to fly from Grand Rapids, Mi to Munich Germany. I would like to be there for 10 days. Any advice for the best days to go to get the best fares? What is a good airline to go with? I was thinking of Delta. Is online booking a good way to go? Or should I hire a travel agent?

Thank you for your advice!

My Emglo m990 is 2.5 hp and can do 5.2 cfm @125 psi. If I drop the pressure to 50 psi, will it produce greater cfm? It has 4 gallon dual tanks.

This minivan was in a right side front crash in January, 2013 in which the airbags deployed. The person selling the van said that he had the car checked for drive ability and found to be good and the airbags replaced. But the airbag light is on. Will a code check tell what needs attention? Or is this a total red flag ? Should I walk away? Your kind input is appreciated.

I have a love joy coupler on my log splitter. A while back I put some medium thread locker on the small hex bolt. I am having trouble getting it to back out and am afraid to strip the hex socket. Any recommendations on techniques to get this thing loosened and removed. I tried WD40 without success. Is there anything I can use to undo this thing? Thank you! Norman

I have hardwood trees on my property. Some of the trees break about 15" above the ground and the top of the tree is at a 45 degree angle. My friend said that is called a 'widow maker'. lol. Is there a safe way to get it down? I am not afraid to cut standing trees, but these broken ones are a puzzle. I heat with wood.

I have viewed hundreds of wireless adapters in the net stores today. I found one that said it's win8 compatible. Called the manufacturer and was told that it is unstable on 8. Anyone aware of a wireless adapter that is win8 friendly?

Thanks!

I know that March, June, September, and December are the usual expiration trading months. Do you know if there are October and November futures expirations traded in addition to the main four? Thanks

Will an AMD motherboard work wiith a Zotac geforce video card without problems? What do you advise?

I have some earnings this, my first LLC quarter. Is my assumption correct that the P+L gets passed to the members (2) of the LLC. Equally, I believe??

I would like to know. I will thank you!

I have flipped a raw land purchase that I bought for $1200 and sold within a few weeks for $5800. Is it the capital gains rate at my tax bracket? Or what?

I have a log splitter hydraulic cylinder with the following dimensions:

5" bore, 2"shaft, 24" stroke, 3000 psi, 16 gpm pump, and manual spool valve.

Tie-rod construction, double-acting, heavy-duty, high-strength tie rods.

Thank you for your time and help! [:=)

I am attempting to perform electrolysis with a car battery charger set at 12V and 10amps. I am using water and sodium carbonate (soda ash) as the electrolyte, a mild steel anode and a 14 gauge copper wire for the negative attached to an old lantern. This is submerged into a 5 gallon bucket. I am trying to reduce the tarnish and rust over a period of 24 hrs. My concern is that the battery charger is cycling on and off about every 15 seconds and is warm. Is this cycling due to the charging of the capacitor in the charger? Is this unusual? I am open to and welcome advice, insight and recommendations.

I am doing this in a well ventilated area so that the hydrogen does not build up and explode.