Tyson R

I built computer recently, installed Vista Home Premium and everything was running great.

I used my older Kensington keyboard and hooked it up. That ran great too. Well, I decided to install the software that came with this package and pushed through the "these drivers are not for Vista blah blah" and continued anyway.

Well, after he restarted his computer, BOOM, no keyboard our mouse works. I cant do do a Vista restore either as the keyboard or mouse wont work at all.

Long story short, I tried connecting a few more mice and keyboards (PS-2) to the machine, none of them will work and every time one is plugged in, Vista says (where you normall see "Updating hardware" messages in the bottom right) Driver not installed properly; and that's it. Everytime you connect any keyboard or mouse.

Now, I cant even boot form Vista CD because my BIOS bypasses that, and the keyboard doesn't work during initial boot up either. So I can enter the BIOS either. So basically I don't have any input capability to my machine. What should I do?

Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000000 PC=0x00000000002D1248

Latest crash info for cpu 0:

Exception state (sv=0x3C4EB500)

PC=0x002D1248; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x002D2250; R1=0x176D3CE0; XCP=0x0000000C (0x300 - Data access)

Backtrace:

0x002D2244 0x002EC058 0x0008C69C 0x00029234 0x000233F8 0x000ABEAC

0xFFCACACA

Proceeding back via exception chain:

Exception state (sv=0x3C4EB500)

previously dumped as "Latest" state. skipping...

Exception state (sv=0x2C919A00)

PC=0x9000B348; MSR=0x0000F030; DAR=0x0036D0E4; DSISR=0x0A000000; LR=0x9000B29C; R1=0xF0100C40; XCP=0x00000030 (0xC00 - System call)

Kernel version:

Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC

panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access

Latest stack backtrace for cpu 0:

Backtrace:

0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80

Proceeding back via exception chain:

Exception state (sv=0x3C4EB500)

PC=0x002D1248; MSR=0x00009030; DAR=0x00000000; DSISR=0x40000000; LR=0x002D2250; R1=0x176D3CE0; XCP=0x0000000C (0x300 - Data access)

Backtrace:

0x002D2244 0x002EC058 0x0008C69C 0x00029234 0x000233F8 0x000ABEAC

0xFFCACACA

Exception state (sv=0x2C919A00)

PC=0x9000B348; MSR=0x0000F030; DAR=0x0036D0E4; DSISR=0x0A000000; LR=0x9000B29C; R1=0xF0100C40; XCP=0x00000030 (0xC00 - System call)

Kernel version:

Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPCModel: PowerMac3,3, BootROM 4.2.8f1, 2 processors, PowerPC G4 (2.9), 500 MHz, 1 GB

Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 64 MB

Memory Module: DIMM0/J21, 256 MB, SDRAM, PC133-333

Memory Module: DIMM1/J22, 256 MB, SDRAM, PC133-333

Memory Module: DIMM2/J23, 256 MB, SDRAM, PC133-333

Memory Module: DIMM3/J24, 256 MB, SDRAM, PC133-333

AirPort: AirPort, 9.52

Modem: Spring, UCJ, V.90, 6.0F, APPLE VERSION 0007, 7/31/2000

Network Service: Built-in Ethernet, Ethernet, en0

PCI Card: pci1106,3038, sppci_usbuniversal, SLOT-B

PCI Card: pci1106,3038, sppci_usbuniversal, SLOT-B

PCI Card: pci1106,3104, SLOT-B

PCI Card: firewire, ieee1394, SLOT-B

PCI Card: usb, usb, SLOT-C

PCI Card: usb, usb, SLOT-C

PCI Card: pci9005,1f, SLOT-C

Parallel ATA Device: Maxtor 4R120L0, 114.5 GB

Parallel ATA Device: WDC WD400JB-00ENA0, 37.27 GB

Parallel ATA Device: SAMSUNG SP0411N, 37.31 GB

Parallel ATA Device: TSSTcorpCD/DVDW SH-S162L

USB Device: Hub, Up to 12 Mb/sec, 500 mA

USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA

USB Device: M2452, Alps Electric, Up to 1.5 Mb/sec, 100 mA

USB Device: MP140 series, Canon, Up to 480 Mb/sec, 500 mA

USB Device: Hub, Up to 12 Mb/sec, 500 mA

USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA

FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec

What do you use to cut paper or graphics typically over 100" long? When we get stuff from the printer it always has excess material that has to be trimmed off. The graphics are always big so we need a large width paper cutter.A straight edge has not yielded best results. Thank You for looking. Tyson

What do you use to cut paper or graphics typically over 100" long? When we get stuff from the printer it always has excess material that has to be trimmed off. The graphics are always big so we need a large width paper cutter.A straight edge has not yielded best results. Thank You for looking. Tyson

I have been requested to bring my computer to work (mac).I need to be able to browse the network folders and get files as needed on various machines from my Mac. Once i have opened the file in PhotoShop cs3, I need to be able to place it back into the file folder or other location on the network (pc)

Details:

Mac Mini 1.42 PPC Os x.4.10

other end

Win XP pro

Thank you all so much,

T.Rex.

This didn't work.

http://answers.yahoo.com/question/index;_ylt=AltAg...

incoming mail server: pop.mail.yahoo.com

outgoing:smtp.mail.yahoo.com, server port 587 without SSL

Does anyone know the numbers to call in Mid Fl,

(pinnellas Co fl)

Fire Martial

EPA

I work as a mechanic at a place. They paint cars w/o a paint booth 20 ft away from me. And they don't have enogh ventilation.The body shop guys don't wear masks. They sand cars and it makes a lot of dust. I have been getting sick and have had head achs for the last week or two. If I step outside for a while i get called i wimp by the boss.

The lift i work under is old and has exposed wires. It is wire into the fuse box and you have to flip a breaker to get the car up. They keep hazardous chemicals open and out on a table.

I have checked the Ignition Module *GOOD*4.9volts.

It has spark@ the coil and @ the plug.And Compression

Its getting fuel and has 38psi @ the rail.

I checked the fuesbox.

Is there a hidden fuse or relay

This doesnt have a Crank Senser right

I have a new lap top and the McAFee pop-ups keep coming up all the time.It sometimes stalls the computer for a long time while it installs this and that.And it asks to update every other day.Is it viable to leave it on.What items are most important

1 viris scan

2 firewall

3 privisy service

4spam killer

???????????????/

It seems like it is always in the way or buging me

Thank You in advance

Tyson