Jon G

I have an HP Compaq 8510w that came with Windows Vista on it, but I just installed Windows 7 Ultimate. The problem is that the speakers do not work. I ran into this problem with one of my other computers, but the driver that I used for that computer does not work for this one. I need recommendations on any sound drivers that are compatible that have worked for other people that have had this problem in the past.

Ben Roethlisberger vs Cleveland

Drew Brees at Tampa Bay

Need to start 2 of the 5 running backs:

Adrian Peterson vs Miami

Arian Foster @ Washington

Matt Forte @ Dallas

Jamaal Charles @ Cleveland

Joseph Addai vs NY Giants

I need to start 1 of these RBs for this week. Which one should I choose and why?

Arian Foster vs Indianapolis

Joseph Addai @ Houston

Jamaal Charles vs San Diego

Matt Forte vs Detroit

I'm leaning towards Detroit or Indianapolis since they were both in the bottom 10 of rushing defense last year....

I am in an 8-team league and I'm wondering if it would be wise to drop Sidney Rice and/or Vincent Jackson and/or anyone else since they will both be out indefinitely. Below is my roster...

Starting

QB - Drew Brees

RB - Adrian Peterson

RB - Jamaal Charles

WR - Roddy White

WR - Terrell Owens

WR - Wes Welker

TE - Visanthe Shiancoe

Bench

Carson Palmer

Joseph Addai

Thomas Jones

Donald Driver

Heath Miller

Sidney Rice

Vincent Jackson

On Waivers

Arian Foster

Matt Forte

Bernard Berrian

Ben Roethlisberger

Jermaine Gresham

I need to start 4 of the 7 receivers:

Steve Smith (Carolina) @ Dallas

Terrell Owens vs. New Orleans

Donald Driver @ St Louis

Santonio Holmes @ Cincinnati

Devery Henderson @ Buffalo

Mario Manningham @ Tampa Bay

Johnny Knox @ Seattle

Thanks in advance

This is from the MTV movie awards. What song is playing when Hill and Hudgens are coming out?

http://www.mtv.com/videos/misc/395484/2009-mtv-mov...

I have a right triangle with all three sides. I just need someone/some people to verify that I have calculated the correct angles.

Side 1 = 25 feet

Side 2 = 12 feet

Hypotenuse = 27.73 feet

Angles (in no particular order) = 25.64 degrees, 64.36 degrees, and 90 degrees

Thanks

There are wind loads at each story of the building frame, what can I use to keep the frame as straight as possible so that the frame doesn't displace too much?

If a train is moving at 100 m/s and a clock is being carried on the train, how many seconds does it gain or lose per hour?

Given the depth = 3", the flange width = 2.509", the web thickness = .34", and the flange thickness = .26", how do you calculate the moment of inertia about the x and y axis?

I'm looking for a table with Schedule 10 Steel pipe fittings (elbows, Ts, etc.) It should also have the nominal sizes for the pipes.

I need to develop an equation in terms of q, L, x, A, and E.

E is the modulus of elasticity, A is the cross sectional area, x is an arbitrary point on the x axis, q is a uniform distributed axial loading, and L is the length of a cantilever beam.

The equation will describe the variation in axial deformation along the length of the axial rod.

I have a simply supported beam with a pin on one end and a roller on the other. The length of the beam is 25 feet. If there is a moment of 30 kips/ft at each support going clockwise, what does the shear and moment diagrams look like?

The modulus of elasticity, E, is equal to stress divided by strain. If an aluminum specimen is pulled so that there is only stress in the x direction, and there are multiple points at different degrees (0, 90, 158, 62, 116) on the specimen where strain is measured, would the modulus of elasticity be found by stress divided by the strain measured at 0 degrees (x direction)?

I have a reference load of 2000 lbs, and I used a program that graphed the reference load vs. strain in an experiment. I took a trendline of the graph to get the slope. Now, how can I use the reference load and the trendline slope to find strain?

I'm pretty sure there is some rule for taking the derivative and integral of this, but I don't remember what it is...