Codey

Ok guys I've got to buy tires for my dually I just bought that has been lowered in the front and rear, the guy said 3 inches up front, we have rebuilt the whole front end an suspension, but the truck is so low the tires will rub the front fender wells when you hit a bump, It has 17 inch Rockstar wheels on it and the size is 225/75r17, is there a size that's any smaller than that? I would still like to stay with the 10 ply tire as much as possible, thanks for any help! I'm going with 245/75r17 on the rear

Ok guys I'm looking to buy a really clean 2000 model chevrolet 3500 long bed crew cab dually, now I'm about to drive 400 miles from oklahoma to lousiana to look at it and possibly purchase it, I have worked on the vortec 350's and know my way around the vortec series engines(and tbi's) and especially the 88-98 style trucks, but I've only drove the 454 trucks never worked on one, is there any common issues on these engines that I should look into? Correct me if I'm wrong but I know the vortec 350's had an issue blowing intake gaskets, but a vortec 454 doesnt right? It has 195k miles on truck and transmission, I am told the engine has below 60k miles on it, it has been tuned and the egr system has been removed, it has long tube headers and cold air intake, if anybody could put in any input about these engines I would greatly appreciate it! The truck has also had the factory 4.11 gear swapped out for a 3.73 for anybody that has done this what's the fuel mileage increase if any? Thanks again for any input

I have a 94 ford lightning with the 5.8 in it, I've change the belt tensioner twice within 1 week, put 3 different belts on it, changed the idler pulley, but after driving it roughly 100 miles the belt will start to work itself off off the harmonic balancer pulley and will cut off the first 2-3 ribs on the belt, I've also just put on another pulley on the harmonic balancer. The other pulleys and accessories are fine, and do not wobble or shake in any way. If anybody could put any input on it that be great thanks

Im looking to buy a new headunit for my 94 lighnting it has to be a 1-din,an I need one that has atleast 3 preouts preferably 4 volt or more, thanks for any recommendations

Ok I have been toying around with car audio for a few years now but i only use like rockford, alpine,kenwood,kicker the higher end name brands, i helped my cousin do an install about a year ago now we put 1 10 R1 rockford prime sub in his truck powered by a kicker 125.1 amp it worked fine, but here about 2 weeks ago now we built a box and put a second R1 10' rockford and he bought a used diamond amp( i know they are cheaper) from a friend of mine (i seen it work) and he put it in and the amp powers on but don't send any signal to the subs i checked the terminals on the amp and the sub connection with a test light and nothing was hot, so he put his kicker back on and the power protect light came on an it did the same thing as the diamond amp did, so my question is what do you guys think is wrong with it? Short maybe? it has a cheaper sony head unit anybody ever had a problem with them Sony's not sending a signal to the amp? every wire is plugged in and good from end to end except for the signal cable from radio to amp i cant check them with a test light. thanks for any advice

i am buying me some new rockford 12' punch P3 woofers and was wondering which ones i should buy the 2 or 4 ohm my amp is a rockford power series 1000.1 and the birth sheet says it is 1678 watts rms and it is 1 ohm stable so i am ok just to buy the 2 ohm and wire them to 1 ohm i know that the impedance is different but hows the sound quality? any better than 4 ohm? thanks

I have a 01chevy 3500 and the factory front door speakers are finally shot, i was wondering what size they were so i could change them out, i have seen 6 3/4 and 6 1/2 but i don't know witch, could anybody tell me who has changed these out before the size of them? thanks

found me a good used set of sub woofers on craigslist they are the old school 12 in. rockford punch series He2's the guy said they were made in 02 and they look brand new, for $200 i have not seen the he2's in while but have memories as a child of when that style cone came out of the ones my dad had in our 01 ws6 trans am of them rattling my brain out; anyway would that be a good deal? they also come with a pretty good size ported box with the square ports on the sides which i will probably sell

i am going to buy the Parker thunderhawk and was wondering if i can only use parker/red hot bolts or if i can use any bolt as long as it is the required length for the crossbow and has the captured nocks, and i was also wondering where a good online place to buy them would be, thanks for any input

I am in the market for buying a bow and at the local sporting goods store today i found a parker bushwacker crossbow for $300 used and a mathews solo cam (few years old) for $300 i do not which model of the solo cam it is but i do know it is a 70lb draw weight with what i think is a 28 in. pull, that's no problem for me but i do not know which one i want. could you guys kind of give me some pros and cons of each? and i also know that the cross bow is only 280 fps no idea on the solo cam

I am thinking about buy a used savage 93r17, 17 hmr at the local gun store but i dont know much about the caliber or that specific rifle, i would use it for smaller game if i shoot any and mostly lots of target shooting, i do know that the gun has what looks like a heavier barrel maybe a bull barrel? it also has a wood stock and the accu trigger , was wondering if you guys could tell me a little about the rifle and the caliber and if $200 bucks is a good buy; oh yea and it has some sort of bsa 40mm scope on it which will be replaced with something else less than $125 i dont really know what yet i just want a cheap gun to shoot with at longer distance.

I was wondering which speaker I need to buy for my car, the rockford T1692 6x9 2-way speaker with a offset cantilever coaxial mounted tweeter, or the T1693 6x9 3-way speaker with dual tweeters for mids and highs i think, just dont know witch would be better, I am wanting more sound than bass because i will have 2 ''12" in. subs in the trunk so tell me your opinion on them please an thank you.

i have the chance to buy one of these rifles at my local pawn shop, the remington 700 sps with sights and no scope for $389.00 in great condition in 7mm remington mag or a weatherby vanguard, it has a synthetic stock with a bushnell banner 50mm scope and sling for about $420 with tax in 300 win mag also great condition, its kind of a hard choice to decide which one ,could i get some answers on which rifle to buy, thanks in advance

What do you guys think of it? how smooth is it? i am getting this for my dad for his birthday, could i get a link also on where to buy it. i just wanted some sort review on it also and does it also have stainless steel bearings, thanks

ok my birthday is coming up pretty soon an im wanting another rifle i am stuck on the basic weatherby vanguard and the thompson center venture, i dont know which one to get i cant find much reviews on either,could somebody list some stuff about the two that they like or dont like? I have a budget of about $450-475 so these two rifles fit my budget because i still have to get an optic i assume i will just get a 50mm Nc star or if anybody else could recommend one under $100, if i get a t/c venture they come with scopes so i wont be needing to get one unless it is not a very good scope, i dont know what brand that scope is on them, and i will be buying from cheaper than dirt the shipping and stuff is pretty decent i hear and the guns are cheap , so that's my question thanks in advance

My birthday is coming up pretty soon and i was wanting to get another rifle i want something in a short action but i kind of like to have a 25-06 which is long action, so my questions are which one shoots flatter up to around 500-600 yards? i will probably end up getting the .308 or 7mm-08 i will be shooting mostly deer,coyote,and bobcat, the gun i want is either a savage axis or weatherby vanguard or a t/c venture. could i get some pros and cons of the 3 calibers and what rifle and caliber you guys would go with? and ammo prices or ammo availability doesn't really matter because i will reload for it,thanks

i am wanting to get a muzzle loader before the next muzzle loader season for deer and i dont know a lot about them, i am more into the shotguns and rim and center fire guns, i dont know what brand to get, i think a .45 or .50 caliber would be good and i would like to get one for around $300-$400 new or used, and i would like to have rifle sights on it to, thanks

i was looking into getting a stevens 200 short action in 22-250 , i have never shot one so i was wondering how accurate it is,is the bolt smooth as people say,i have not seen any bad reviews but i wanted to ask for my self, it will be use on smaller game and some deer; i just would like to know what you all think about the gun,some positive and negative things, thanks

i dont get what "twist" on a rifle is, i was looking at 22-250 and it said the twist was 1 in 12 could somebody explain what that means,i have also heard that it has something to do with the number of revolutions the bullet makes before it exists the barrel

i am looking to buy a stevens model 200 in the next few months and wondered which caliber should i get, i will be using it for hunting deer,hog,coyote just dont know which i want but thats the 2 calibers i got it narrowed down to. would a .300 be over kill on a deer? could anybody compare the two please? could you guys recommend a good scope for less than $150 to? thanks.