Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.

Lv 2821 points

troy r

Favorite Answers8%
Answers220
  • Why can't I make a call on my Blackberry 8703e?

    My Blackberry want let me make a call its shows connecting but then it disconnects right afterward please help

    1 AnswerPDAs & Handhelds1 decade ago
  • How to undo a tack weld?

    My radiator support is bent in the middle just go a new one and I need to know how to undo the tack welds on the old one so I can install the new one please help.

    5 AnswersMaintenance & Repairs1 decade ago
  • Hard to shift gears when reving hard in a Acura Integra?

    Just had a 5speed transmission installed and when I rev it really hard about 5000 rpm its hard to get it in gear sometimes won't go into gear. I notice before I had new transmission installed there was a rattling noise when I let off the clutch pedal and I didn't have the clutch replace and the noise is still there its a 1990 Acura integra 5speed can anyone help me out.

    4 AnswersMaintenance & Repairs1 decade ago
  • How to install a pick up coil on a 1987 Mercury Grand Marquis?

    Hi, My Mercury Grand Marquis pick up coil has broken all up and the car will not start going to pick up one today along with a new rotor button since it has to be remove to put the pick up coil on I need to know how to install the pick up coil do I have to remove the distributor or not? Please help

    2 AnswersMaintenance & Repairs1 decade ago
  • Just connected two DVD-rw drives need help!?

    They work but computer isn't asking me what I want to do with the disk when I insert one.I have one IDE cable with two connecters that say master and slave, I change the setting on the top drive to master but the light doesn't blink when disk is inserted. The bottom ones is on slave I can still burn from one this to another just want it to ask me what I want it to do with the disk.

    1 AnswerDesktops1 decade ago
  • Heater not working on a Mitsubishi Galant.?

    My friends 2003 Mitsubishi Galant heater only blows cold air. Thermostat has been replaced and radiator flush still blows cold air what else is it to check its getting cold here in NC please help.

    4 AnswersMaintenance & Repairs1 decade ago
  • Why Do Florida insurance Laws suck?

    Why come Florida doesn't require bodily injury liability. I recently post a ? yesterday found out it was Florida instead of GA. Now my uninsured motorist got to take care of my wife injuries and he get off easy. They provided us a rental car and pay us for our loss car but nothing else. So I guess anyone who lives in Florida could hit onyone and get away with it. I was wondering if the insurance company has anything else where I could filed this clam under.

    1 AnswerLaw & Ethics1 decade ago
  • What's the car insurance requirements in GA?

    I need to know what is required and is not required and what falls under full coverage and liability in the state of GA.

    4 AnswersInsurance & Registration1 decade ago
  • Car accident question?

    My wife was in a car accident the 19th car was totaled loss due to the other person not paying attention now the insurance company says the person has no bodily injury insurance and she got hurt. We are trying to find out what does pain and suffering falls under? His insurance company is in the state of GA and we live in NC. He was in fault. Thanks in advance.

    9 AnswersInsurance & Registration1 decade ago
  • How to measure CFM @ 40,30,20 and15 PSI?

    I have a new are compressor and need to match it up with a paint spray gun but can't find out how to measure CFM @ the above PSI my manual doesn't have it it only says 5.2@40 PSI and 4.2@90 its a 3.5 horsepower motor and a 4.6 gallon air tank. And what spray gun will work the best only going to use it a couple times not looking for a million dollor paint job just want to look nice. Peak is 115 PSI

    1 AnswerMaintenance & Repairs1 decade ago
  • My Acura Integra jumped timing.?

    I recently posted my Acura not starting. I found why my timing belt had jumped timing, I was told that when a Acura/Honda jump timing it bends the valves is this True? And what kind of repair bill will I be looking for?

    7 AnswersMaintenance & Repairs1 decade ago
  • Acura not starting!?

    I have a 90 Acura Integra. I was driving about 55 mph when it died on me. I had a mechanic look at it and he said that it was firing a yellow spark and that I needed a distributor. So I bought a brand new one and installed it and car still won't start. Fuel is wetting the plugs. The coil is on the inside of the distributor. The new distributor came with everything new. The timing belt isn't missing any grooves and feel tight. I don't know what eles to check . CAN SOMEONE PLEASE HELP?

    1 AnswerMaintenance & Repairs1 decade ago
  • Do anyone know how to wire a Aftermarket Tach (90 integraGS)?

    I have a 1990 acura integra gs. I bought a 5" Tachometer because my factory one didn't work. I was told to wire the tach signal wire to the blue wire on the connector on the driverside firewall next to the strut. But there is 3 blue wires one is like a carolina blue and the other is a regular blue. Which one is the right one?

    3 AnswersMaintenance & Repairs1 decade ago
  • what's wrong with my computor?

    When I play a dvd on my computor it sounds like it skipping but the dvds isn't stratched. I've tried everything even new dvds. It plays but the words sounds wierd. I've tried every player on my computor. But everyone plays the same.

    9 AnswersDesktops1 decade ago
  • May tach won't work?

    I had posted a question earlier this week about a ignition problem. Took it to a mechanic and they fixed it but now my factory TachMeter isn't working. It worked before and now they won't stand behind there work. How easy will it be for me to fix this problem? Its a 1990 Acura Integra. Can anyone tell me how many wires there is and where its connect to from the Tach? Its a 5 speed if that help.

    2 AnswersMaintenance & Repairs1 decade ago
  • Is it the ignition switch?

    My car starter spins if the igniton switch is bad would it still turn the starter? I have replaced the distributor 3 times in three weeks I don't think this is my problem. Do anyone one know if there is a relay or something between the ignition switch and the distributor causeing my car not to fire. I have my timing check and its fine. Will the starter spin if its bad? My batt is new. The car is a 1990 Acura Integra GS. Sometimes it fires and sometime it don't. HELP PLEASE!!!!!!!!!!!!!!!!!!!!!!!!

    6 AnswersMaintenance & Repairs1 decade ago
  • Will this shifter fit my car?

    I own a 1990 Acura integra. It has a short throw shifter, the gears is to close. I have a 86 or 87 Honda CRX CIVIC will the factory shifter work in my Acura?

    1 AnswerMaintenance & Repairs1 decade ago
  • Where should i cut to get the most air and no water on the filter?

    I just got a cold air intake for my Acura Integra, I pulled old intake and box off and the one under the fender. I need to get the most air possible but don't want it to suck water or rain. Can someone tell me what should I cut or remove.

    4 AnswersMaintenance & Repairs1 decade ago
  • could it be a charging problem?

    I have a 1990 acura integra gs. I have two Kicker 12s and a Kicker mono amp. When I play the music with the car off sometimes it won't crank up but the starter spins fine. If I wait about 30 it seems it'll start. I've tried jumping the batt when this happens but the starter just sits there and spin. Has anyone had this problem?

    5 AnswersCar Audio1 decade ago
  • I have a 1990 Acura Integra?

    I have replaced the distributor and batt my timing is fine but the car still just zoom when i turn the starter. Sometimes it crank and sometimes it won't. The distributor i took off was bad could it be something that is tearing up the distributors? When it do crank it revs up and down but still have the same power as always, plugs and wires is new. I need help!!

    1 AnswerMaintenance & Repairs1 decade ago