john

I’ve looked at the brdm 2, ot 64skot and the bmp line/series, are there any other options for APCs to import to the USA for relatively cheap?

I’m new to the projector scene, I was looking for a pico projector, the two I have found are the optoma lv130 and the Aaxa s2, just as some basic info, I will probably be sitting at around 10ft or closer in a pitch black room. Which of these projectors would suit me better or if there are any others I would love to know, my price range would preferably be 350 or lower. Thank y’all for your time.

I’m new to the projector scene, I was looking for a pico projector, the two I have found are the optoma lv130 and the Aaxa s2, just as some basic info, I will probably be sitting at around 10ft or closer in a pitch black room. Which of these projectors would suit me better or if there are any others I would love to know, my price range would preferably be 350 or lower. Thank y’all for your time.

I’m looking for a projector to project a 60inch screen, I’ll be seated a little bit over 6 feet away, is it wiser to get a known brand(benq optoma Epson) 480p or go with a Chinese 720p or 1080p projector. Any model numbers or names are greatly helpful.

Which subwoofer would be better for lows or overall response the hdx3 15 or the deafbonce 27series 15

Which subwoofer is better (for lows vs overall) the hdx3 15 or the deafbonce 27 series 15?

With a standard home theater reciever with an led output would I be able to use a behringer ep4000 as a subwoofer amp, if so what would the switch order be?

Can I use a laser module without the ttl controls, and if I don’t use the ttl controls would the laser module always be on?

Can I use a laser module without the ttl controls, and if I don’t use the ttl controls would the laser module always be on?

I’m looking at powering a skar zvx v2 at or above 1500w rms, I’ve looked at the crown xls1502 and the behringer nx3000, which of these amps is better, or would there be better options for a subwoofer power amplifier?

I’m looking at putting a skar zvx v2 12 into a ported box that’s 1.5cubic feet, Would it be ok to have it in a box that small and run it at it’s rated 1500w rms?

I am going to be building a subwoofer box for a skar evl 12 and I was wondering would there be any perk to have 50inches worth of port area and the appropriate port length to match the fs of the sub(32hz) vs skar recommendation of 24inches of port area at 21 inches for the length of the port.

Large?

An issue. Thanks