Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.

Lv 31,490 points

Tomtortoise

Favorite Answers35%
Answers225
  • How to start in RC plane flying?

    hello, i love robots and remote controlled things and have flown many of those cheap $20 planes and there fun and whatnot but they only fly for a few minutes and are very limited. I currently own a Hitec Laser 4, and 8ch receiver and 4 servos (standard size 2X 90 degree ones and 2X CR). i also have a few a few Ni-Mh batteries (8.4v and 9.6v) i want to start out with a plane that is like one i saw at a RC airfield, it was small, made of foam, flew slow and was able to do nose hangs and other fun stuff. And information or links would be helpful. also would i be able to use the receiver, batteries, or servos that i have or will i need new stuff?

    2 AnswersHobbies & Crafts9 years ago
  • Adding songs to iTunes without adding duplicates?

    Is there any way to add a folder of songs to iTunes without re adding an exact duplicate ? i have a large 2000 song folder i want to add but about 1500 of them are exact duplicates and i don't want to remove the old ones as they have all the play counts and ratings.

    2 AnswersMusic & Music Players9 years ago
  • Help with Arduino code?

    so my plan is to make an adjustable speed strobe, im just learning to code so i found a tutorial with some basics and some instructions to a strobe. the current code is

    int potentiometer_pin = A0;

    int led_pin = 7;

    int on_time = 100;

    int analog_value_multiplier = 15;

    int strobe_delay = 0;

    int minimum_delay = 500;

    void setup() {

    pinMode(led_pin, OUTPUT);

    }

    void loop() {

    strobe_delay = minimum_delay + analogRead(potentiometer_pin) * analog_value_multiplier;

    digitalWrite(led_pin, HIGH);

    delayMicroseconds(on_time);

    digitalWrite(led_pin, LOW);

    delayMicroseconds(strobe_delay - on_time);

    }

    i have the LED + on digital 7 and the pot on analog 0, it is a 10K pot with one side hooked up to 5v+ and the other to ground. my problem is that the LED stays on and turning the pot just changes the brightness. any help on what to do? not just a new code but what to do, i want to actually learn how to fix this.

    1 AnswerEngineering9 years ago
  • System of Linear Equations word problem help?

    So the question is. Mel Tin sells half=gallon containers of frozen yogurt for $4 each and Gallon containers for $ each, One day Mel sells a total of 50 containers and made $290.

    So far, the equation i have is 4X + 7Y = 290.

    my problem is that i am unsure of the other half of the equation and what to do with the 50 containers to solve it.

    6 AnswersMathematics9 years ago
  • Becoming an Electrician, College, Military, or Apprenticeship?

    Hello, I was thinking about becoming an electrician or other physical skill based job, i was wondering if anyone has any ideas about what path i should take. I was thinking possibly military first as that would give me a lot of experience and then try to become certified after or is it better to do an apprenticeship first, get certified, and then work for yourself or a company. Any advice would be helpful, not just in electrical work but in other jobs like a machinist, i am a very hands on and creative person

    1 AnswerOther - Careers & Employment9 years ago
  • Good over the ear headphones in the $20 -$40 range?

    Im just looking for some good sounding headphones that look good and that wont break

    3 AnswersMusic & Music Players10 years ago
  • Lead-Acid battery voltage boosting circuit?

    Im currently using a 12V Lead-Acid battery to power a speaker amp but when the voltage gets to 11.5 volts, it no longer has enough power for the amp. Im wondering if there is a easy circuit i can build that will take 11-12V in and put 12.5-13V out

    P.S. im good at soldering, i just need a schematic for a circuit

    5 AnswersOther - Electronics10 years ago
  • Wacom Bamboo tablet as a touch mouse?

    I am thinking of getting a bamboo touch/ pen tablet to use instead of a mouse. I'm wondering how well this would word and would it work on a dual monitor setup

    1 AnswerAdd-ons10 years ago
  • Hitec Laser 4/ reviver not working?

    I just got a used Hitec Laser 4 which seems to be working but is not communicating with the rx (HFD-08RO) powered by 4 rechargeable AAs (4.8v) and both with a CH 86 Chip (75.910) i am a rc newbie and have no idea what it is. Thinking it may be a broken crystal.

    1 AnswerHobbies & Crafts10 years ago
  • Robot Motor Speed Controllers?

    i am in the process of turning a rc truck into a robot. i have 2 servos a reciver romote etc but am not sure if the motor controllers will work. i have 2 Gears IDS-1 units but am not sure if they are too powerful for cheap rc car motors. also what size and voltage batterys would work.

    2 AnswersHobbies & Crafts10 years ago
  • Computer Screen Music Effects?

    I currently have a two screen computer setup and am tired of looking at iTunes so i was wondering if there is a program that can make the screen flash to the beat of the music or has the colored bars that slide up and down. i don't care if i still use iTunes or not i can move my folders. any suggestions for cool stuff like this.

    2 AnswersSoftware10 years ago
  • Dell Dimension 2350 Internet problem (XP)?

    i have a Dimension 2350 that i reinstalled XP on and currently cannot connect to the internet. I installed the ethernet lan driver and still have no luck im connected by ethernet directly from my wireless router I only have service pack one installed

    1 AnswerDesktops10 years ago
  • Airsoft Order $1000 BUDGET!!!?

    Ok so my friend is new to airsoft and he is rich so his parents gave him a $1000 budget (really wtf my parents never gave me that) anyways We have already decided on a G&G Vietnam style M16 for $250 and got mags bbs battery etc and we are up to $400 so any other suggestions. We will be playing on a large farm with one central bunker. be creative what would you buy with a $600 Evike gift card?

    2 AnswersOther - Outdoor Recreation1 decade ago
  • Airsoft cheap shopping websites?

    i found this website http://www.steepandcheap.com/ and i was wondering if there was i site like this for airsoft.

    3 AnswersOther - Outdoor Recreation1 decade ago
  • MAME cabinet color scheme?

    Ok so i finally got around to building my cabinet and im wondering what color i should paint it. I know that i should use laminate but im only 15 and don't have enough money to afford laminate. so anyways i was thinking to paint the left side light blue and the right side red with a white stripe that goes down the middle in which the player 1 and 2 start buttons are housed. Please comment on this idea along as other cool ideas or how you painted your cabinet if you made one.

    2 AnswersVideo & Online Games1 decade ago
  • How to get help for a friend who smokes pot?

    Ok so my friends friend smokes pot for idk how long because i don't really know him. Anyways he has been smoking with my friend recently the past two weeks. he is starting to become addicted. I want to get him help because my other friends are just ignoring the fact. Should i just tell the school substance abuse person???

    5 AnswersFriends1 decade ago
  • Play my Xbox in my room but keep the console in my room/Wireless video?

    OK so my xbox is in my basement and there it has an Ethernet cable. In my room there is no Ethernet. What i thought is that i can use a computer monitor to play in my room (directly above the xbox.

    I have wireless headphones but the video is the problem.

    I have this thing that sends a phone line wirelessly so if i make 2 cables that send the video over the data lines, would it work.

    Also does anyone know if there is a cable for AV to VGA

    2 AnswersXbox1 decade ago
  • Dubstep Song Name (Answer if you listen to Dubstep)?

    so i heard this song and i think it is by Rusko but anyways. there is a robotish voice that explains the parts of dubstep and the last thing he sais is "the most important part is... The Drop"

    If you know or even think you know the artist or song name PLEASE HELP.

    2 AnswersOther - Music1 decade ago
  • Sister acting strange?

    So my sister is 13 has been doing things like locking her door everytime she uses her computer, also deletes her history EVERY time she uses her computer. If i try to say anything to her when her door is locked she starts yelling and also if I ever try to see or ask what she's doing she grunts and changes the topic. The reason I'm asking is that I don't want her to be talking to like a predator or something. Does anyone know if I should be worried?

    5 AnswersFamily1 decade ago
  • How to make a parody (someone with any recording experience)?

    ok so i made lyrics for a final countdown parody. so can i play a karaoke version on audacity and just sin on a microphone while recording. Any tips. please help if you have any recording experience

    2 AnswersSinging1 decade ago