Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.

Lv 618,951 points

spraymonkey001

Favorite Answers49%
Answers2,317
  • fuel gauge in 2000 ford taurus is stuck halfway.Any ideas?

    don't have the vehicle on hand,has a 3.0 single cam not sure about flex fuel,only info I find so far is for erratic gauge.Just trying to get a lil info before I go look at the car any help is appreciated

    1 AnswerMaintenance & Repairs9 years ago
  • what is a good first digital camera for an old timer?

    Looking for a good digital camera for a 60 something guy that is used to using old school 35 mm's.I'm thinking something that has the same feel as the old school when he's holding it without too many frills to aggravate him trying to keep it around 200 bucks or less

    1 AnswerPhotography10 years ago
  • what is a good first digital camera for an old timer?

    Looking for a good digital camera for a 60 something guy that is used to using old school 35 mm's.I'm thinking something that has the same feel as the old school when he's holding it without too many frills to aggravate him trying to keep it around 200 bucks or less

    3 AnswersCameras10 years ago
  • can anyone advise me on a good automotive scan tool?

    not ready to drop 2-4 grand on a genisys but I'd like to get probably a code reader with some scanning capabilities.Something updatable with all the cables for the different makes focusing on domestic and asian for,now hoping to spend 3-5 hundred dollars.Lemme know what you think guys,wanna hear from some experienced techs

    2 AnswersMaintenance & Repairs1 decade ago
  • 96 honda accord engine mount?

    I have a 96 honda accord with a V6 I need the rear engine mount.It's a vacuum controlled hydraulic mount that i can only find at the dealer.Does anyone know of an aftermarket company that either manufactures or rebuilds this mount.Any help would be greatly appreciated

    1 AnswerHonda1 decade ago
  • Dodge guys,Who's familiar with code PO601?

    dodge caravan 3/01 3.3 liter code PO 601(actually reads P601)The tech sez replace ECM.Is this going to fix my problem? Sypmtoms usually when sitting in traffic but also at random times cruise flashes in message center and engine momentarily loses power,sometimes stalls will crank right back up after

    7 AnswersDodge1 decade ago
  • Desperate Housewives Reruns?

    Ok,so I been out of work for a few months and I got sucked into old episodes of desperate housewives.I got to the point where Mike got married and the show rolled back to the beginning.So who did he marry,susan or catherine? I'm going back to work soon and I don' think I'll be around when they get back to the end.Please help

    1 AnswerOther - Television1 decade ago
  • Can anyone suggest some good auction sites to sell off some of my old stuff?

    Looking to get rid of some old stuff and wanna do it the easiest most profitable way possible,Thanx

    2 AnswersOther - Internet1 decade ago
  • what days do tax checks come in the mail?

    I've been doing direct deposit for about five years bit the IRS is mailing my stimulus check.As I recall refund checks only come on 2 days of the week monday and another one does anybody know which days they come on.I really need that money and don't know if I should give up hope for this week or not.I already got a notice it IS coming,should have been here by the 5th according to them

    6 AnswersUnited States1 decade ago
  • Does anybody know of a good website for old mustangs?

    Specifically I have a 69 fastback and there is only one drive belt running everything.I need to research the proper belt routing and see what Parts I'm gonna need

    4 AnswersFord1 decade ago
  • Does anybody have the wiring diagram for Cadillac El Dorado 1969? let me know thanks?

    need at least the wiring diagram to a/c circuit, and the complete electrical diagram would be great

    3 AnswersChevrolet1 decade ago
  • Problems with 95 jeep starting after clutch install?

    after installing a clutch in this jeep we can't get it to start.computer scan shows the crank and cam are not in sync.We've already tried replacing both sensors with no luck.Any help would be greatly appreciated. BTW,It's a 4.0

    6 AnswersMaintenance & Repairs1 decade ago
  • problems with 95 jeep cherokee starting after clutch install?

    after installing a clutch in this jeep we can't get it to start.computer scan shows the crank and cam are not in sync.We've already tried replacing both sensors with no luck.Any help would be greatly appreciated.

    2 AnswersJeep1 decade ago
  • how can I repel or exterminate bufo toads?

    bufo marinus,it's a large poisoinus toad that can kill dogs should the dog bite into it.And man do my dogs love to chase em

    2 AnswersOther - Home & Garden1 decade ago
  • how can I repell or exterminate bufo toads?

    bufo marinus,it's a large poisoinus toad that can kill dogs should the dog bite into it.And man do my dogs love to chase em

    4 AnswersDogs1 decade ago
  • Employer switched everyone from w-2's to 1099's?

    I've been working at this place for 3 years.One day my direct deposit isn't there.Since then they have been paying everyone cash and told us this is the way it's gonna be from now on.What do I do? Also we have an IRA with this company and they have been taking money out of everyone's check but they have put nothing in the IRA acounts.Do they owe us only what they took out of our checks or do they also owe the amount they pledged to contribute from their end and what about the instrest that would have been gained had they put the money in when they were supposed to.Also now that basically all their employees are subcontractors do they need to carry workmans comp,what if I get hurt on the job???This is in Miami,Fl by the way and I know this is a lot to shove in one question but any help would be greatly appreciated...Thanx

    4 AnswersOther - Careers & Employment1 decade ago
  • employer switched everyone from W-2's to 1099's?

    I've been working at this place for 3 years.One day my direct deposit isn't there.Since then they have been paying everyone cash and told us this is the way it's gonna be from now on.What do I do? Also we have an IRA with this company and they have been taking money out of everyone's check but they have put nothing in the IRA acounts.Do they owe us only what they took out of our checks or do they also owe the amount they pledged to contribute from their end and what about the instrest that would have been gained had they put the money in when they were supposed to.Also now that basically all their employees are subcontractors do they need to carry workmans comp,what if I get hurt on the job???This is in Miami,Fl by the way and I know this is a lot to shove in one question but any help would be greatly appreciated...Thanx

    9 AnswersUnited States1 decade ago