Jeff

I'm going to use a flat off white on the ceiling and a light tan color on the livingroom walls. Just would like opinions on which sheen to use. Thanks in advance!!

What is one to think if by accident they found that their significant other has been searching through the personal adds. Not the normal adds but the more explicit adds. When I confronted her, she said she does so for the enjoyment of them. However, it has been bothering me for a couple of days as I can't shake the questions if she is acting out on them. Full disclosure is that things have not been great but not bad either. She started a new job and her hours have changed as well as some other quirky things. Just curious to others opinion if I'm being to sensitive. But then again the red flag is up and the questions are there. Thoiughts?

I'm thinking about installing some flexible bullnose in a couple of arch openings in my house. Is there any tips or suggestions to make the job easier. (Do I need to tape after I screw the bullnose into the archway? ETC.) I appreciate any advice whatsoever. I'm a simple layman at best when it comes to projects.

I have natural maple colored cabinets and an emerald pearl granite countertop. (dark green almost black with quartz flakes througout the granite). I'm having a hard time deciding on the right color of tile flooring to put into my kitchen. I would like to have a warm and inviting look and feel that will enhance both the granite countertop and cabinets. I would probably look at a coordinating backsplash as well. I get alot of natural light in the kitchen. Thanks!

I'm gutting out my kitchen and need advice on some different color schemes for a new tile floor in the kitchen. I'm going to install natural maple cabinets and new granite countertops. The counter tops are "emerald pearl". It is a deep green almost black top with blue, green, silver quartz crystals scattered throught the counter top. It will be the focal point of the kitchen. I have alot of natural light that comes in through the windows. A fairly spacious room. Any advice would be greatly appreciated as I have no decorating sense. I'm set as far as the cabints and countertops go. My wife "the boss" has told me so. My job is to come up with the paint and tile flooring. Thanks in advance!

I live in the Chico, California area and would like to know how much should I expect a contactor to charge per square foot on a newly constructed house. Thanks!

I always thought he sung a song called "she wears a gold ring". It goes something like She wears a gold ring around her finger and it mine.....Can anyone help me out here. Looked on You-Tube with no luck. Thanks!

I'm building a house and would like some opinions on essentials for a newly constructed house. I will be taking the ideas to an architect next week for him to draw up. Just want to make sure that I'm not over looking something. Any and all suggestions are welcome. I appreciate you time and consideration. Let me add a couple of details. No larger than 2000 square foot . I would like a three bedroom and two bathroom plan with a possible fourth room.

I'm in the market to have a contractor build a house or I could choose to buy a manufactured house. I'm just looking for some insight from more experieced people or those who may have had bought a manufactured house. I'm looking for pros and cons. I will be buying a house within the next month. I have already had an architect draw up floor plans, but after looking at some manufactured houses on a whim. I can get alot more house for alot less money. Quality of the manufactured houses seem to exceed those of a constucted house. Thanks for your time and I look forward to hearing yopur insights.

I'm in the market to construct a house. I'm at odds whether to build a "stick" construction house or buy a manufactured house. I was hoping that someone with more experience could shed some lights on the matter for me. I'm torn at which one to do. If anyone has some hands on insights of the pros and cons, I would be very appreciative. Thanks for your time and efforts. I truly look forward as to what your opinions are.

Whenever I put the keys into the ignition to turn the car over the mustang will do nothing. All I hear is one click from the voltage regulator. So far I have replaced the battery, red battery cable, and starter relay switch (solenoid). Still no luck. When I apply a screwdriver to the "hot" post on the solenoid to start it, the starter seems to stay engaged now when the engine begins to run. A terrible shrieking sound occurs. I'm not sure if mt next step is to replace the starter or could there be a problem with the ignition switch wiring??? Just throwing out some ideas. I'm a beginner and would appreciate the advice someone with more experience may have. I'm spent more money on this than I would have liked so far. Time to ask for help. Much appreciated. Again, when I insert the keys into the ignition all I still get is a click from the voltage regulator. When I bypass the ignition and use the hot post on the relay switch to start the Mustang a terrible screeching noise occures. I think the starter is not disengaging. When the engine is turned off it sounds like the starter is "winding down".

I'm putting on brand new shocks all the way (front and rear) on my 1965 Mustang. Would love to hear opinions on which set of these KYB shocks are better suited.

1. KYB GR-2 LOW PRESSURE GAS MODELS (SILVER) FOR ALL 1965 TO 1970 MUSTANGS

--- or---

2. KYB Gas Adjust (KG4517 Front) & (KG5517 Rear) White 1965-1970 Mustangs

If you have any other suggestions about different shocks that would be appreciated as well. I'm looking for a firm but not stiff ride. Thanks for your time and suggestions.

I recently had a tire company install tires on a set of American Racing 15x7 Torque Trust Rims I purchased staright from the manufacturer. The fronts are 215's and the rears are 235's. I'm having problems with rubbing in the rear anytime the road is slightly bumpy ao "wavy". The front tires ...well...very little clearance with the front fender when the wheel is completely turned. Is there a practicle way to help keep these rubbing issues from occuring? I thought that may having the leaf springs recalibrated back to original stock height would help or even having it recalibrated a bit higher (1/2 inch to inch). Air shocks? I'm no mechanic so any ideas or thoughts would be appreciated. I know the best idea would be to go with smaller rims and tires, but I like the look of my current set up not to mention I've spent a fortune. I called American Racing and was told theses should work with no problems. Could it be a tire issue? Thanks for your ideas in advance.

Jeff

I'm looking to get a nice sound system for my 65 Mustang. I was wondering if there is anyone here that can help me put onr together for less than $600 that will sound great. This will include speakers, amp, sub, etc. I have a custom made radio already. Any and all suggestion would be appreciated. Just to be clear, I would like a nice sounding system. I'm not a rap or louding thumping type person. I want to keep the original look as much as possible. Thanks again.

I'm wanting to buy a set of rims and tire for my 65 Mustang. I would like to have that "muscle" appearance or beefy look. Any suggestions on types and sizes of rims would be appreciated. Also, tire sizes would be helpful. Been to a few tires stores and have gotten different ideas. Would love to hear from you guys here. To be honest I'm leaning toward American Racing Torque Thrust D's 15x7. Thanks for your time and suggestions.

I have a 1965 Mustang GT. Would like to put a new higher erformance carb on. Which one would you recommend and the model of the carburator. Thanks...

I have a choice of getting a 1965 GT four speed top loader with a 289 stock engine (225 HP). Fresh paint and engine just rebuilt as well as new standard interior -or- I can buy a 1966 mustang (Originally a v-6) total restored 289 with a new high performance engine (340 HP) with everything new on it with some major upgrades. (New shift kit, paint, wheel tires, all chrome new, etc. Which one would be the bettr buy. I'm gonna keep it for a long time.....

Did Ford come out with a 1966 GT models for its in-line six cars? T

In fact, does anyone know of any store that sell 4 lug pattern rims. I've tried E-bay and Craigs List with no luck. I've also seached the internet with no luck. I'm hoping one of you fellow Mustang enthusiast can help me out PLEASE! Thank you!

If so, anyone know of a place where I can find an original system (new /used)? And, how much should I expect to spend on a complete unit. Mechanic cost? Thanks to all who reply. Just bought a 66 a couple of weeks ago and love it! Needs air though....Too hot here in the summer toot have it. Thanks again!