Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
can you split signal from direct tv satellite from one box and split into 2 tv using 2-way satellite splitter?
I used to do it with cable signal and split it into three tv's from one cable box using a 3-way splitter. it's possible that i will be watching the same channel on both tv's and can only be operated by remote control from one tv source. That's ok. I just want to watch it sometime in the garage while working on some stuffs.
17 Answers
- n0bodyLv 41 decade agoFavorite Answer
Yes, you can split it, and you don't need a special satellite splitter, as long as you are splitting AFTER the box. Just basic cable splitter will work.
Once the signal has gone through the receiver, it is just a regular TV input - whether it came from cable, antenna, or satellite - doesn't matter.
Also, if you had another box, you could use a special satellite splitter (called a multi-switch) to split the signal, coming from the dish BEFORE the box. You do not need a dual head dish for that, as it is incorrectly stated above (although, you, most probably, DO have a dual head dish already - for totally unrelated reasons).
- Anonymous6 years ago
This Site Might Help You.
RE:
can you split signal from direct tv satellite from one box and split into 2 tv using 2-way satellite splitter?
I used to do it with cable signal and split it into three tv's from one cable box using a 3-way splitter. it's possible that i will be watching the same channel on both tv's and can only be operated by remote control from one tv source. That's ok. I just want to watch it sometime...
Source(s): split signal direct tv satellite box split 2 tv 2 satellite splitter: https://biturl.im/vZFQk - 1 decade ago
I think you can take the output from your sat box and split that, of course both TVs will get the same station.
I know you can't do that with the cable coming from the LNB(sat. dish knobby thing) even if you have 2 boxes.
Each box needs it's own LNB source.
If you want to add a box:
It's only an additional $5 / month if you find you want another box, and I bought a used one on ebay for $.01!
Sat companies don't mind you having used equipment so long as you subscribe and have a valid card which they will provide you.
Just call them, tell them that you have a used box. They'll ask for serial #, and give you a new card for it and charge you accordingly.
Of course, you'd have to run another cable out to your LNB and be sure it has an available output.
Hope that helps.
- How do you think about the answers? You can sign in to vote the answer.
- Anonymous1 decade ago
This will work just fine, but you may need a "signal amplifier". When you split the signal between the TVs, two units will be sharing 1 unit worth of signal strength, which may cause weak, fuzzy signals on both TVs. If so, just go to Radio Shack and get a "Signal Amplifier" :)
- 1 decade ago
Yes you can as long as you know you can not watch a seperate channel from teh one a nother person may be watching inside the house on the tv it's split with
- fun_guy_otownLv 61 decade ago
Yes, you can, but you will get the same channel on both tv's with only one box being the direct link to DirectTV's uplink.
- 4 years ago
reading is way better the book keeps u thinking therefore you get more detail in what folks are thinking and also you have more imagination
- 4 years ago
Reading the book instead of viewing the movie is the ultimate way to see what the writer expected. Reading uses your thoughts, hones your reading skills, and can transform your life vocabulary
- Anonymous1 decade ago
of course you can. you will just need a long cable wire and 2 way splitter