I need to know how to program my keyless remote I have a silverado 2001 truck. I really appreciate it?

It should be in your owners manual. You don't program the remote itself you actually add the remote frequency to your security system.

Usually with GM you have to sit in the vehicle.

Turn the ignition to run (w/o starting it) than off than to run than off than run again and it should be confirmed visually by the vehicle.

Next remove the radio fuse.

Next using the original remote hold down the Lock and Unlock buttons at the same time until the vehicle confirms it.

Next repeat the Lock and Unlock process with the new remote.

Hint: the production numbers and the FCC numbers on the rear of the remotes have to match.

Hope this helps.

i offered one on ebay for my truck some months in the past. you are able to desire to purchase one for an '01 or 02' kind truck (they're a similar) like your truck. in case you be attentive to somebody that has an 01-02 kind, ask to work out the serial selection on the back of their key fob. you will could desire to get one with that serial selection precisely. Now for the instructions: turn ignition key to the ON place. Press and carry the lock button until ultimately you hear the door chimes. you're actually interior the set mode. enable off the door lock button and grab the foremost fob and carry down the around lock and launch buttons on the foremost fob (one thumb on each and every button) for extra or less 15 seconds or until ultimately you hear the truck doorways lock and launch itself. once you hear the truck doorways locking and unlocking, Then enable off the fob and you have purely re-syncronized the door locks to the fob. turn the foremost OFF. do no longer forget to pull the keys out of the ignition. (The doorways won't lock if keys are interior the igntion.) Now attempt to fasten the doorways with the fob. it would be working now. Now you're executed. sturdy success and enable me be attentive to in case you have any issues.

goto http://www.keylessremotesforless.com/ looks like they might be able to help. if not you're dealer can do it for probably around $30.00-$50.00 depending on the flat rate. also some independent shops can program them. call around, get a price, get it done.

Big D is right. Our manual has the instructions.

Take it to a dealership--RKE has to be repogrammed through a Tech2.

Go with Big D.

you need to take it to the dealer.

EC