Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
automotive repair grand prix won't stay running what do i do?
99 grand prix se 3.1 the car starts but once its starts it cuts off i canged the fuel pump and still no progress i counldn't change the fuel filter ne body have ne ideas or could help me get moving again.
5 Answers
- 1 decade agoFavorite Answer
u shoudlnt double post, but it needs spark plugs, batteries check some engine lights, check oil, check trans fluid, and check air filter, and check cylinders and the drive belts
- 1 decade ago
It very well could be that the oil pressure sensor is bad or that the oil pump is bad. The ECM looks for a signal from the oil pressure sensor (or switch) and if it does not receive it within a couple of seconds after ignition it will shut the engine off. Have you checked for trouble codes stored in your ECM?
I am wondering why you didnt change the fuel filter because water in the fuel can cause the same symptom. Fuel filters are made of a material that absorbs and allows gasoline to pass through it. If you get a slug of bad gas (an excellent reason to buy branded gasoline from a known oil company) it could be plugging the filter as soon as the fuel starts flowing to the engine. Another thing to check would be the fuel pressure regulator. If this compnent goes bad then your system may not be building enough pressure to inject the fuel into the engine.
Source(s): 2 decades of fixin what needs fixin - 1 decade ago
GM had bad ignition switches for several years in the late 90's and on into the 2000's. After the vehicle starts and dies, check the hot wire's coming from the ignition to see if they are live with power or not.
The switch, and not the key and tumbler is most likely the problem.
- deltechLv 41 decade ago
If it has a theft deterrent issue going on ,it will start and die just like you descibed.before throwing anymore parts at it ,would not hurt to ck to see if this is mabe the problem. A scan tool will help here
- How do you think about the answers? You can sign in to vote the answer.