can someone explain to me about amp and sub woofer specs/features??

Basically there are two main specs to look at when choosing an amp. First is the power, you would ideally need an amp that is 700w rms. Then you would have to look at the impedances (measured in ohms) of the sub(s). Because your sub is DVC you will need an amp that runs at either 700w rms @ 2 ohms or 700w rms @ 8 ohms. That later is going to be the best but since that would be hard to find and very expensive you should just get an amp that is 700w rms @ 2 ohms. A monoblock amp that has the specs 700w rms x 1 @ 2 ohms is what you should look for. It doesn't have to be exactly 700w though. It can be anything as long as it is not over that value by 10%.

That amp would work ok with that sub. How I would wire it would be to connect only one voice coil up to the amp and bridge it. That would get you 400w rms which will sound pretty nice. You will not be powering the sub to its full potential though but that is ok.

Basically, that amp would work but I would keep looking if you didn't buy the amp already.

Good Luck!!!

Will if u get the 2000 watt amp it will sound good but the thing is that if u turn it up too loud and for a while u can blow the sub and no it does not matter if the amp is 1000 watts and the sub is 750 it will be ok

I need to know what subs you want to run with this amp?