What small block chevrolet intake manifold style works with World Products Sportsman IIs?

it would help if you posted the part numbers, but all world products sportsman II heads are none vortech heads.

world products dose make vortech heads, but it will be stamped right on the the heads ( vortech )

and i wish i could tell you just what intake will go good with those heads, but i would need to know the part number is to those heads, what cam you have or are going to use, and what motor as in , year and what it come out of?

the year wouldve helped as well, but if this motor is before 1986 i would use

edelbrock performer rpm/air gap

part# EDL-2601

if its 87 or newer part# EDL-2604

both are from summitracing.com

thats the best intake for your heads with the motor set up you have as there not much dont to it from what you posted.

this intake makes power from idle to 5,500rpm.

o ya and those are NOT vortech heads...

World Products Sportsman 2 Heads

sportsman 2 heads will take a non vortech manifold.

seem to be certain how the intake bolts on . The extra moderen vortec sort has bolts that are straight away up and down . On those intakes you may placed studs on your heads and drop the intake on , you cant try this on the Gen one million stuff . you have a ninety 9.999% risk that if its for a carburator this is going to artwork. The dip stick in undemanding terms affected the block and pan . each element else is the comparable on the carburated autos.