Can you sharpen norelco blades with a sharpening stone?

use tooth paste, or you can buy some honeing compound at a auto store,

i use tooth paste on mine,

Norelco Blade Replacement

You're right about the blade replacement. I actually got a reconditioned Norelco for $7 cheaper than the replacement blades.

Now I buy a microscreen Remington at Walgreen's for $20. The last one lasted almost 2 years. It's kind of a disposable electric razor at that cost and that longevity.

Before you go to the expense of replacing the screens try cleaning them- they may only be filled with body oils or soap scum. Remove the blades/screens and soak in rubbing alcohol for 20 minutes. Then use a blow dryer or canned air to dry them. if they don't work any better you are dtuck buying a new one.

Gail GSOLFOT

You will need a small brush to clean shaver and heads, also a flat piece of glass ( a mirror or picture frame glass will do).

For the best answers, search on this site https://shorturl.im/aweqA

To get the proper bevel,you might want to file it,first,then use the stones afterwards,maintaining the proper angle is the important thing.You've got the stones right,soft then hard arkansas,never used india.'course never let my knives get that far to need them

Oooo Bad idea you will just wreck it unless you had a very precision tool. Just go out and buy a new blade.

If you want your face to look like a hamburger you can. Those bad boys will rip you to shreds if they are not properly balanced! OOOOOOOOUCH!! You might have better outcome if you used a ripped open aluminum can!

if they are dull consider using course stones

I don't think so, as you would have to get into those little blades.