Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
97 Chevy Silverado has no spark....Please help.?
The truck has a 5.7 engine and lately its been having a starting problem. Sometimes in the morning it wouldn't start....if I came back a half hour later to try yo start it again, it would fire right up. Now it wont start at all. It has no spark whatsoever. I replaced the coil, had the ignition module checked which checked out good. I replaced the cam sensor in the distributor against my better judgment. The only thing left is the crank sensor, right? Unless of course I have a bad wire or ECM, but I have no pin-out to do continuity checks. Any suggestions?
Has no auto start and no resistor in the key.
All fuses have been checked. Thanks.
I already tried the wiggle test at the crank sensor. Thanks
Sorry, should have mentioned that I checked for spark right off of the coil and of course the plug wires themselves.
4 Answers
- 1 decade agoFavorite Answer
check the crank sensor and ALL fuses if you need wiring diagrams email me with a want list woodardjp@yahoo.com
- ?Lv 71 decade ago
If you have auto start,disconnect that and try it.If the key has a chip in i,that could also be the problem.However if it is the ECM or crank sensor,usually once one of those go out, they are out,It sounds like a short,but the best thing to do is start with the cheapest things and eliminate each possible problem.
- 1 decade ago
THERE IS A POSSIBILITY IT COULD BE YOUR CRANK SENSOR. BEFORE I DID THAT TRY TO JIGGLE THE WIRES AROUND ON THE SENSORS AND HAVE SOMEONE TRY TO START IT WHILE YOU DO THIS. YOU MIGHT HAVE A WIRING ISSUE.
