when i turn my computer on it goes straight to black screen that reads?

A damaged hard drive could be a possibility. However in order to boot the computer, load your Windows Vista CD into the CD/DVD drive and allow the computer to boot from the disc. If you get it to start up, then check if the computer is reading the hard drive any at all by trying to open the drive. Sometimes all you need to do is remove the cables from the hard drive, wait a minute or two and reconnect.

Did you order a diverse snap pictures card with the computer? if so, there is likely a diverse seen reveal unit connection and also you're able to need to stick with that. If now no longer, how lengthy did you leave it on for? in protecting with risk the decision is determined incorrectly. have you ever tried going into safeguard mode? to attempt this, turn on the computer and initiate urgent F8. you opt for to get a menu decision which will enable the decision of safeguard Mode. as without delay as in safeguard Mode, verify the reveal settings and shrink the decision to 800x600. Then reboot the gadget. If it then boots in many cases, attempt increasing the decision really, yet now no longer as a lot because the optimal.

Ya it may have.You may need to give it to an engineer to fix this.The cable connecting hard drive to the main thing may have got disconnected.It had happened to me once.But mine is a COMPUTER not a laptop

have you tried removing your hard drive in your laptop and try to assemble it again? maybe it will work