when I play dvds on my toshiba dvd player there is no sound what should I do?

Are you putting your cables into the right places??

OK. If you have the Owner's Manual(s) on hand; Review

them for the recommended hook up examples. Be sure

that your cables are in good working order. Following

what the Manufacturers' recommend is always a good

place to start. Double check your wiring, to insure that

you have your component(s) connected correctly. I trust

this will work well 4 U! I wish U and yours the very best!

In your TV there should be a port either in back or in front with 3 red, yellow, and white circles. Make sure your DVD player plugs in the same colors are plugged in properly to those colored circles.

check the back and make sure all of the cables are plugged into the audio out spot instead of the audio in spot

check if the audio cable on the scart is in properly

make sure that the A/V cable is plugged with the correct color code to the "input" recepticle on your tv, not the "output" hope this helps, o and make sure its the oposite on your dvd player, colors matching, only all cables connected to the "output" side

Use the play station to watch the rest of the movie. The player may be defective.

Check if you have the "mute" button on

check the cables.to see if they are working..answer my question too..thanks