Removing a car window?

You should make sure your deer are dead before you put them in the Suburban

If you're talking about the small window in the back, behind the roll up window, you'll need to lower the roll up window, and with the door trim removed follow the line of the window edge moulding between the two sections of glass up and on the outside/top edge of the door you'll see a Phillips screw head sticking up. Remove this screw and pry the window moulding and edge support towards the roll up window and remove the pieces of glass and clean up the area them place the replacement glass in the window opening and with a block of wood, carefully tap the glass into position, AFTER you have lubrcated the window edge mouldings with liquid soap.

Once the window is completely installed line up and replace the top screw and the door trim and you should be good to go.

Good luck

John

type into search box

how to remove door panel

how to remove door panel video

the glass lift out the top most of time you have to til it one way or another to get it to slide thru but its not real hard to do really might even find a video of try

how to replace door window 1987 Suburban

how to replace side window glass chevy

you have to take the door panel off, and all the trip pieces that go around the window (the rubber stuff)..it should come out fairly easy