Intake manifold to block gaskets on 350 small block?

You'll actually be better off using a thick bead of silicone gasket maker on either end. Those rubber seals always leak especially in the heads have been shaved or the block decked.

This is not the best place to ask this question.

Try this novel idea.

Go over to your telephone

Most people keep a big yellow book near their phone.

Open this book to the pages that are colored yellow.

On the upper corner of these pages colored yellow, look for the word "Automobile", without the quotes.

On these pages labeled "Automobile", find the section labeled "Automobile Parts & Supplies - New", without the quotes.

Here you will find some local Auto Parts stores, imagine that.

Try dialing some of these numbers on your telephone.

A nice knowledgable person should answer your telephone call. They will be able to answer all of your questions.

By the way, they usually don't use gaskets on the ends of these SBC manifolds anymore. They were too prone to leakage. Most people seal these areas with black RTV.

Yep, heads from any style of small block Chevy will in good shape. If the engine has the inventory cam and heads precise now, purely changing the heads probable won't do as plenty because of fact the inventory cam would be a vulnerable link. i could replace the two the heads and cam for an exceptionally major develop it extremely is extra helpful balanced. large flowing and elementary to discover heads for Chevy small blocks are actually the 1996 - 2000 Vortec casting. they'd bolt onto any small block Chevy, and consequently you in many circumstances hear the term "Vortec 350". to boot the heads you will want a Vortec style intake manifold additionally, that are presented with the help of maximum time-honored intake manifold businesses.

most auto parts stores sell intake manifold gasket sets but i doubt you will find the 2 end ones by there selfs

auto zone or advance should have it. if they don,t they can get it in 1 day.