Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and the Yahoo Answers website is now in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
how to remove the drivers door panel on a 1999 dodge intrepid?
took 7 screws out of panel but still wont come off. the handle doen't have anything fastener that i can see. does the portion of the panel that has the switches in it have to be removed first?
3 Answers
- FrankieLv 71 decade agoFavorite Answer
Most all door panels are installed in the same way. The following link will guide you through it.
Source(s): Just my opinion - Anonymous4 years ago
all the replace autos are an identical different than for the rigidity gears that make the window pass up and down. to get rid of the door panel i exploit a stiff (STIFF) putty knife to get the 'rivets' to come out. you could desire to be as near to the rivet as a threat. no longer doing so might injury the rivet (generally nylon or plastic) or pull it loose from the panel itself. i might inspect the fuses or the potential button first. those factors fail extra beneficial than the motor does. If the motor does could desire to get replaced there are metallic pop rivets that carry it to the door. you will could desire to drill those out and replace them with new pop rivets. A pop rivet kit isn't too costly at vehicle factors shops. they might even have the top gadget to get rid of the door panel.
- 1 decade ago
yes remove thoseswitches make sure you removed the part for the handle and unless pull up on the doorpanel up then out
