cody_higdon

I am 17 i just got a careless driving ticket it was for turning,squiling tires, and fish tailing.(I pulled e brake up) and a no insurance charge will the pull my license and how much will this cost me?

i know very little about dirtbikes especially 2 strokes im a car guy my freind has a honda 25 2 stroke that he is giving to me it wont start it died goin up a hill about a year ago so i was wondering what could have went wrong with it,it has fuel and fire help plz

I was wondering the biggest motor i could fit on that frame and if i cant fit a bigger motor on it easy what were some cheap ways to get more power out of it?

I have a 89 s-10 blazer with a 350 bore 30 over edelbrock performer rpm intake holley 750 carb a crane cams cam not sure of duration and lift just know it has to have atleast an 1850 stall converter which is in it a 700r4 transmission an accel supercoil ignition system no box just coil distribuiter wires and plugs and the head are off a high output 305 they have double vavle springs pinned and gurrdled the biggest valves i could fit were 2.00intake and 1.88 exhaust so how much rear wheel horse power do you think im making and what compression ratio i have beat a few cobra mustangs on the streer?

it is an 87 Trans AM 4 wheel disc 3.73 posi rearend 4 speed automatic tranny a tuned port 350 in it my mom thinks its too much car for me my dad says i can get it i am 17 and i would be tading a 79 silverado for it that has a 35o in it that is bore 30 over and edelbrock performer intake and 750 holley carb with flowmaster exhaust

i have a 350 and i want to know what kind of plugs and oil i should use ive heard for my year model 79 ive been using 10w40 and ac delco r44 plugs should i change oil weight and what plugs should i get for it i dont want platnium plugs i mean r44 or r45?

oh and i just got flowmaster 40 series and new 2 and 1/2 inch pipe put on it it had turbos with the motor before now its got flows but it didnt have the power i thought it should even before the exhaust got put on it yesterday

you need a parking pass on the first day of school in knox county? or anywhere for that matter

ummm i was wondering how much of a boost ill get i am buying heads from a freind the casting number is 993 mine is 882 and my heads now are cracked or i wouldnt care intake on mine is 1.92 exhaust is 1.50 on the 993 intakes is 2.02 exhaust 1.60 they both have 75cc combustion chambers so how much of a boost am i looking at and i want some 327 double humps i wish

i have a 350 it has 2 cracked heads i was wondering if i put sbc 400 heads on it with a edelbrock performer intake and 750 edelbrock carb how much of a hp boost im looking at and what else i can do to get more out of it.

its not stock its bore 30 over and with a 750 quadrajet it blew away my freinds 05 mustang gt it was a closer race i beat him buy 1 car length the compression is 10 to 1. Oh and when it goes back it will not have that big a** fan on it im putting a 18 inch bcool electric fan

i just got this camaro it appears and i was told it had been rebuilt less than 20,000 miles ago i put myself a new distrubuter and ignition module also cap and rotor buttun on it and fire breaks down at 5150 rpm so i was wondering what could cause this. easy 10 points if your answer fixes my problem

i have a 350 it has 2 cracked heads i was wondering if i put sbc 400 heads on it with a edelbrock performer intake and 750 edelbrock carb how much of a hp boost im looking at and what else i can do to get more out of it

my 79 silverado's thermostat locked up i thought it just blew a headgasket cause it was missing on the middle cylinders on the pasengers side head but i filled it up with water to day to make sure no water was getting in the oil wich it hasnt and tried to turnitover it wouldnt i only tried once then pulled all 8 plugs turned it ovver water out of all 8 cylinders so i know hydrolocked motors can bend a rod but sice it wasnt running when the water got in the cylinders i was wondering if it was possible i was pressure testing the cooling system with a pressure tester at the time to see if the heangasket would shoot any water out the side and is it still possible that none of my heads are cracked i beleive they are cause their was water in all 8 cylinders but just to verify

to headbang to the king of hill intro? easy 10 points first answer gets best

its always on the chargr so idk why its acting like this it is a compaq presario with a intel celeron m processor so help me plz easy 10 points

Im 16 i have a 79 silverado 5.7 liter 350 and it is bore 30 over the rest is stock but it will eat a new mustang gt all day and he has a 86 z28 with flowmasters performer eps edelbrock intake and headers a 750 edelbrock card and a small cam and it is a 350 aswell well iwant it and he said it is way too much car for me to handle since hes had it to 163 with pedal left over about a quarter of pedal left but i think id do fine with it it is posi trac with a 3.73 gear my truck has a 3.08 with a locker in it he also said that my truck will be wrcked the first time i open it up a lil so what do you think?

it has 4 wheel disc all the way around and a 350 in it i just got it it is a 4 speed automatic the guy told me it was limited slip but both wheels seem for me to start spinning at the same time and stop at the same time so that should make it positrac right? and what gear is most likely under the rearend? 3.73 or 3.43?

truck and dude asked if i wanted flowmaster original 40 series or promaster original 40 series said all promasters were was cheaper flowmasters made by the same company and everything so i was wandering if any one has ever heard of promasters? and how good are they?

it has a grant steering wheel a 5.7 liter 350 some wide, it does have a little rust in fenders (all of them this old do,interior excellent condition no rips or tears,bedliner,sliding rear window goodyear tires,and a billet grille how much can i get out of this im wanting to buy a camaro

does anyone know how much original 40 series flowmasters run apiece?

easy 10 points