Roadrunnermike

Ive already unhooked the Battery. and poke in there W/ a knife,, If I remove the whole radio out , can I get to it then?

Ive already replaced the struts, springs, and strut mt. bearings, what else is there, ?

I have a Samsung Blu-Ray player and started using netflix a month ago. It started to get slower to load whenever playing movies, now it just gets a msg..... We are having trouble playing this selection now, try later,,,it acts like it has spyware or a virus in it,,, Is that possible? it is online,,,How could I fix it? or is it shot,, the discs play perfect

My 2.2 L lost power on the Hwy. then barely started only idles ,very rough, give it gas and nothing,it wont speed up,,, Fuel Pres. is suppossed to be 41 to 47,, I saw it hit almost 40, then it dropped to 20 to 30 psi, either running or not and climbs slow,, Im sure its shot but. Before I spend 230.00$ and drop the tank, I know I answered My Own Ques. but want to be sure,it could be nothing else ..Compression is 220,,all,,and New wires and coils spark strong,, and no error codes show up on the Comp.scanner..

I want to put a pair of 275/60/15 Tires on a 7" Rim,, I think the tread width is 9".. If I do, is it going to wear bad in the center, or should they last a while and feel good?

I have a 96' Izuzu truck, 2.2 GM engine,200,000 miles,, I replaced blown head gasket last year, seated the valves cleaned it up,put back together,clyinders and pistons looked smooth,and no ridge at top,,now its running real rough,, compression,is,, 1- 65,2- 120, 3- 55, 4- 170,, so 2 half dead cyld. I poured some oil in the dead holes and the comp. is no diff. ,the oil press. is still good, it burns some oil,,, but a valve job is 200.00 and a rebuilt engine is 1500.00, I do the work but I dont have 1500.00$ to spend,, but do I take a chance and do a valve job, or wait for an engine,,Thanks for Your advise!

We have a 1984, 85 hp. Force outboard, has many new parts, was running great, then started slowi ng down and barely ran,then wouldnt start at all We replaced coils and ignition boxes cause of no spark on 2 cylinders, then cleaned all carbs, and saw fuel pumping out when the line is unhooked, and all plugs have good spark, and compression is 150 on all cyls... could someone give Us some advice on what to check next? Thank You.

My Sisters 2008 Honda Civic odometer just died, I dont see any fuses bad, cound a Honda Guy help out please?

Thanks

Mike

I pulled up to the 85% ethanol pump today, and went ahead and got $10.00, to try it.cause it was cheaper, but I dont know much about it, Im afraid it will ruin my fuel pump or injectors, what do you all think? It runs ok but it smells a little like corn burning or something LOL!

I have a 96' Chevy S-10, 2.2 4 cyl. Thanks for any answers

It just started this, and the shower drains slow,, Does it sound like a possible vent problem?

I removed the stereo and fixed it, and now it says enter code. Is there a factory code? Im trying to find the manual. but I wondered if there is a factory code, and how do You enter it,

Thank You,, if anyone knows

My sister stuck a CD. in Her player and there was already one in there, its jammed now, and the slot is the size of the CD. and I cant find any screws under the dash, does the front plate snap off? or is there some screws somewhere,? Ive worked on many cars but this ones weird,. Thanks for Your help.

Mike

1000 Architects and Engineers For 9/11 Truth, is filing Suit tomorrow in San. Fran. to show their Overwelming evidence that all 3 buildings were brought down by controlled demolition, check out the vids. first before leaving dumb Political comments about Left wing crap, the Guy is a repub.Trying to find out the truth, We deserve to know

http://www.youtube.com/watch?v=KdjvNeZMr-A

http://www.youtube.com/watch?v=vx1djmkFIFw

My 1996 Isuzu Hombre, 2.2 runs perfect, and cool, but when warm oil pres. drops into the red at idle sometimes, but when cool itstays at 45 to 50 lb.would the sending unit cause this or do I have bearing or oil pump problems.I guess the send. unit is the most logical place to start. Thanks