mallicoatdd

I just installed a brand new steel pre-hung front door, which opens into my house with the handle on the right (from the view outside the house). I followed all the guides and instructions for plumb and level, which by my 4' level said it was good. However, on the handle side, the top of the door won't sit flush against the jamb when closed. It sticks into the house about a 1/8th or maybe even almost a 1/4 inch. How do I fix this ?

1998 Plymouth Breeze 2.0 automatic, timing belt broke, pulled it all apart, ready to replace. Found mark on crankshaft pulley to set cylinder #1 at TDC, can't find any marks on Camshaft pulley face or gear teeth or head near case. How do I set correct cam timing ? Have valve cover off but not sure how to set it by looking at valves either. ?!?!

increasingly, within a half an hour or so of eating dinner I will pass out, as if someone has given me a sleeping pill. I have noticed it happening occasionally throughout the day as well when I eat. It seems like fall asleep for a few mins wake for a second fall asleep for a few mins wake for a sec repeatedly, I find my self very groggy and unable to focus when it is happening. After about a half an hour or so it will usually go away. Sometimes it seems worse when I have eaten something sugary, but not always. It is getting VERY consistent with dinner time in the last few weeks. I am Male, 30, moderate exercise, weight is avg

Any clues ? I looked at Diabetes but I don't see any of the other symptoms that I found online. I have noticed when it is "time to eat" and I haven't that sometimes it will happen as well and will clear up as soon as I realize I need to eat and do so. I noticed my vision getting blurry right before hand as well.

I am looking for a software solution to create a guided tour for my website. In essence I am looking to create a video, possibly with sound that shows the screen as I go through the various features of the site, how to do things properly and answers to common questions visually. I would like to have little pop up windows that highlight certain things on the screen.

Send some links if you know of a solution. Send some links of examples if you have used them as well... throw in some cool examples of little things you used when you created yours if you like :)

Thanks

D

I purchased a laptop, an IBM 2652 ( A20 ?) There is a sticker on the back of it that says the following " 802.3 MAC address : ......" with a series of 12 letters and numbers in pairs of two. Also there is a little plate with two screws in it, that cover a compartment. In this compartment there is two little cards that are attached to the back of the mother board. One of them has the same sticker on it, that is on the back of the case listing the "802.3 MAC address: " on it as well. There is another compartment on the back that holds the RAM.

I am wondering what this address sticker is referring to ? I have looked it up on the net and it seems that it might be a wireless network card? If so I can I configure this.

I have a actiontec modem with wireless that I use with my DSL.

I also remember reading somewhere that you can look up the IBM serial number and find out more about my laptop.

Thanks

I have created a Baby Sign Language eCourse ( http://www.brilliantbundles.com/ ) . The course is html based, so it is basically an offline website. It is modularized with links as the navigation, also referring to few .doc and .pdf files and other websites. I have checked it in Netscape, IE and Mozilla as well as Many versions of Windows. But someone asked me if it would work on Linux. I have no freaking clue. I would think since it is a webpage, working from the hard drive yes. But I don't know.

Any help is appreciated.

Thanks

I have a 1995 Toyota 4runner, 3.0 liter 6 cylinder 4 wheel drive truck. I bought an after market kit from Rhino that included the Disk, cover, pilot & throw out bearing. I pulled the system apart, had the flywheel resurfaced & then put it back together. Before I hooked up the rear drive line I testied it out... I started the car, put it in first, clutch in & shifted into reverse... Fine. I turned the truck off. Then I pushed the truck out of my shop & connected the drive line. The truck would then not shift into gear while it was running. I have bled the system, twice just to be sure. Still nothing. The pedal seems a little soft. Also if the truck is stopped & I put it into gear & push in the clutch I cannot move the truck.. it is as if the clucth is not engaging all of the way.

I don't want to have to pull the whole thing apart & if I do I don't know what would be the problem. I made sure everything was aligned and tightened down evenly to keep it that way... help

I have a question about the following tax situation.

I run three home based businesses with my wife that were started in 2005. I also work full time. Through all of these businesses we have made about $1500.00.

We have expenses such as printing materials, Internet, Phone, Mileage, ebay fee's, advertising costs, website setup and maintanence. Thus far we have not gotten any kind of biz license, filed a ficticious name or anything else

My main questions are:

1. What are the pro's and con's of doing an LLC that operates them all versus simply filing a Schedule C with my Tax ID? If i do this now before the end of the year will it apply to this whole year. or do I start fresh with next year as an LLC.

2. I would like to buy a computer before years end and be able to amortize (?) it all this tax year using the "hummer clause" (section 117 ?) ?

3. What is the best accounting software for setting things up...

4. Are there small biz tax softwares that really work well.

Thanks

I have a 96 Toyota 4runner 3.0 liter and I need to replace the clutch. I am wondering if there is anything in particular that I need to worry about when doing it, as I would like to do it myself. I have moderate experience and am confident that I can do it.

The main thing I am wondering is, what parts am I going to need to buy to do this. I want to buy everything that I will need to do the job in one trip (that has rarely happened in the past) as well as things that I might as well replace while I am in there, as far as maintanence.

Thanks.

I have a small workbook that I have created to use for a class that I offer as part of my business... baby sign language. It is 45 pages long... it has some small basic clip art images and a colored border... I don't need anything fancy, but want to keep it professional looking so I want to skip out on the ring binders of all size, number and type... I got a quote at kinko's of $25 which is outrageous in my mind so I am putting it out there for some opinions and options...

Thanks for your help

I am looking for links, tutorials, and or books that are for the very beginner and cover the basics. I use photoshop and am trying to create some trifold pamphlets. My main questions are about the use of color palettes, font combinations and over all layout. I want my pamphlets to look professional and eye catching.

Thanks

I am trying to create something using photoshop 7. I want what is on the screen to be a real scale... so if I want it to print as being 1 inch... I want it to be 1 inch on the screen... also I want to be able to make it any bigger than the size of the paper... 8 x 11.5

I have used the rulers and the grid, but it doesn't seem to be a true scale.

I know this is a basic question, so much so that I can't find it in tutorials... Thanks for the assistance.

I have some art, 9 pieces Watercolors ( I think). They are on what appear to be 8 X11.5 pieces of thick paper and the pictures themselves are probably 5x7. They are of scenes in paris, they are numbered and named and there is a signature in the lower corner. They are as follows:

3 Paris -L'Arc de briscomphe

5 Paris -Placesu Gertre

8 Paris - Juas de la Cournelle

10 Paris - Le Moulin rouge

11 Paris Place de L'Opea

No 21- Notre Dame, I'le StLouis

23 Paris Place de La Concorde

34 Paris - Pont de l"Archeveche

35 Paris Eglise st Peirre de Montmartre

Number 3 and 11 have a signature in the right hand corner that is a short name it ends in "y" and the second letter is "a" it looks like it could be Bary

The rest have a signature in the right ow left bottom corner that is a longer word and ends in "y" also it appears and the second letter is "a" as well. It looks like it could be delany

Any info would be appreciated...

Thanks

I work with a company that offers services to small businesses (less than a 100 employees), as well as those that are self employeed and work out of their home in many states.

Our services are designed to protect and grown businesses by giving them access to services that BIG business enjoy, such as consultations with Accountants, Tax Advisors, HR Directors, IT Managers, Hosting a website and putting it together with unlimited changes. In addition to all of this my firm is there to protect the business legally by offering consultations, contract review, debt collection, and representation in civil suits among a few other things.

I am very excited to be involved, I am just not sure how to approach my target market. It seems people are so inundated with information that they are in a blur or they can't see how so much could be offered for so little. I need ideas of how to get them to see it, but more importantly see me.

Thanks

I am running windows XP and have a creative live 24 bit sound card. The system is connected to an altec lansing surround sound system with 5 speakers. I am running an aftermarket mic, when i first started using it it didn't have any feedback, then out of no where I get a huge buzzzzzzzz all the time.

HELP

What woud be the best way to handle presales of tickets. As far as online, calling a number, the actual tickets... I am gung ho about it but I am starting to wonder if it is more than I can chew...