ITGUY

I usually receive 600 dollars every 2 weeks. The last check that just came in this Monday only had 300 dollars with no explication of why it is only half. None of their phone numbers work as they all say we are too busy, try again later.

Does anyone know if EDD changed to a week by week basis vs the bi weekly I was receiving? I did not run out of funds as i know i have another 2000 dollars in my account with EDD.

Thank you

To take an electrical cord plugged into the wall and splice it open and make it a usb charger for an Ipod.

Outlet []------------110V cord----------[USB]

(VUSB+5V , D+ 2.0V D- 2.8 V , and a ground) the 4 wires of the USB*

This should draw about 500 mah. Also, if the device could be designed to not draw power when not being used. What resistors and other components would i need to pull this off. Im guessing the inside of the cable has 2 cables, a positive and a ground. so the positive would have to be slit into 3 wires of +5V,+2V, and +2.8V. Then the Ground to the Ground What resistors and other parts will i need to pull this off? Thanks!

I have a PC with a 240V power supply. I want to upgrade the video card to a PCIe low profile video card that says it needs a minimum of 300V. Is my 240 set up going to fry , or does it even matter?

The case is very small and I CANNOT upgrade the power supply without also upgrading the case.(which i do not want to do) The card will run off of the motherboards power without a plug from the power supply.

To take an electrical cord plugged into the wall and splice it open and make it a usb charger for an Ipod.

Outlet []------------110V cord----------[USB]

(VUSB+5V , D+ 2.0V D- 2.8 V , and a ground) the 4 wires of the USB*

This should draw about 500 mah. Also, if the device could be designed to not draw power when not being used? What resistors and other components would i need to pull this off. Thank you!

240V 15A Pentair VS 11018 Pool pump will not turn on. Both leads are reading 120V each. Pump has no life.It is brand new.

I am single, and have no one to claim. If possible, I would like to claim 8 or 10 and keep 100% of my taxes and then pay back what ever I owe at the end of the year. Is there anything wrong or illegal with doing this? Any penalties associated with doing this? Thanks!

I was in the Reina Sofia in Madrid and came across a really cool painting of a man and woman at a dinner table with a dead animal on the table and half decomposed animal busts on the wall and on the other side the skeleton bust of another animal. I think there is also a baby human fetus skeleton on the table as well? It is in the style of José Gutiérrez and it might very well be his painting? Any ideas what it might be called?

1100 sq foot house with 4 big windows (40" x 50") and 2 small windows (24" x 36") and 1 sliding glass door.

Just an average price out the door. Also how much just to tent the windows I have now?

I have a 30,000 gallon pool and the pump works fine until I vacuum. Once i start to vacuum it will work great for about 15 seconds and then stop working. At this point if I check the trap and it is clear then i will backwash the pool. then the process loops again. The water is not dirty when i backwash but doing that seams to get the suction going again? What is wrong with my pump. Sand Filter pump.

Looking for a way for users to be able to add their own data to my webpage but also allow users to delete the input as well. Not permisions based at all. Just like an "X" next to each box that anyone could click on and delete anything that anyone inputed.

Thanks

If you look below you can see that "ax.computername" will display the local PC's name. I want to turn that PC name into a link. So when a user clicks the PC name it will open a new page.

<script type="text/javascript"><!--

var ax = new ActiveXObject("WScript.Network");

document.write(' ax.ComputerName ');

//--></script>

The source code below shows the computer name as ax.computername. I am trying to make it a link that can be clicked on.??

document.write('<img src="../images/icons/monitor1.png" ondblclick="vbscript:start()">' + ' ' + ' ' + ax.ComputerName + '<br />');

how can i make the ax.computername a link? So when a user clicks on their computername it will go somehwhere when clicked?

Right now the msgbox will only show the IP address. But i want it to ipconfig/all instead of just ipconfig and show the IP address and the physical address

it looks like i have to edit this line

" If InStr(ThisLine, "Address") <> 0 Then IP = Mid(ThisLine, InStr(ThisLine, ":") + 2) "

but i dont know how to

-----------------------here is the script below----------------------------------

Function start()

Dim IP_Address : IP_Address = GetIP()

If IP_Address = "0.0.0.0" OR IP_Address = "" Then

MsgBox "No IP Address found.", 0, "Not Connected"

Else

msgBox vbcrlf & "Current IP: " & IP_Address, 0, "Connected"

End If

End Function

Function GetIP()

Dim ws : Set ws = CreateObject("WScript.Shell")

Dim fso : Set fso = CreateObject("Scripting.FileSystemObject")

Dim TmpFile : TmpFile = fso.GetSpecialFolder(2) & "/ip.txt"

Dim ThisLine, IP

ws.run "%comspec% /c ipconfig > " & TmpFile, 0, True

With fso.GetFile(TmpFile).OpenAsTextStream

Do While NOT .AtEndOfStream

ThisLine = .ReadLine

If InStr(ThisLine, "Address") <> 0 Then IP = Mid(ThisLine, InStr(ThisLine, ":") + 2)

Loop

.Close

End With

GetIP = IP

fso.GetFile(TmpFile).Delete

Set fso = Nothing

Set ws = Nothing

End Function

How to make the following VB Script not auto execute when the page is loaded.?

On my web page i have this in my header to load the script

<script type="text/vbscript" src="js/ipc.vbs"></script>

I want to user a hyperlink that when clicked will execute the VB script

and below is the "js/ipc.vbs" script.....how can i call the function GetIP() from the html page. Right now as soon as i launch the webpage it prompts me the IP address without clicking anything. Please Help!

--------------------------------full vbs script in question below-------------------------------------------------------------

Dim IP_Address : IP_Address = GetIP()

If IP_Address = "0.0.0.0" OR IP_Address = "" Then

MsgBox "No IP Address found.", 0, "Not Connected"

Else

msgBox vbcrlf & "Current IP: " & IP_Address, 0, "Connected"

End If

Function GetIP()

Dim ws : Set ws = CreateObject("WScript.Shell")

Dim fso : Set fso = CreateObject("Scripting.FileSystemObject…

Dim TmpFile : TmpFile = fso.GetSpecialFolder(2) & "/ip.txt"

Dim ThisLine, IP

If ws.Environment("SYSTEM")("OS") = "" Then

ws.run "winipcfg /batch " & TmpFile, 0, True

Else

ws.run "%comspec% /c ipconfig > " & TmpFile, 0, True

End If

With fso.GetFile(TmpFile).OpenAsTextStream

Do While NOT .AtEndOfStream

ThisLine = .ReadLine

If InStr(ThisLine, "Address") <> 0 Then IP = Mid(ThisLine, InStr(ThisLine, ":") + 2)

Loop

.Close

End With

'WinXP (NT? 2K?) leaves a carriage return at the end of line

If IP <> "" Then

If Asc(Right(IP, 1)) = 13 Then IP = Left(IP, Len(IP) - 1)

End If

GetIP = IP

fso.GetFile(TmpFile).Delete

Set fso = Nothing

Set ws = Nothing

End Function

------------------------------------------------------------------------------------------------------------

On my web page i have this in my header to load the script

<script type="text/vbscript" src="js/ipc.vbs"></script>

and below is the "js/ipc.vbs" script.....how can i call the function GetIP() from the html page. Right now as soon as i launch the webpage it prompts me the IP address without clicking anything. Please Help!

Dim IP_Address : IP_Address = GetIP()

If IP_Address = "0.0.0.0" OR IP_Address = "" Then

MsgBox "No IP Address found.", 0, "Not Connected"

Else

msgBox vbcrlf & "Current IP: " & IP_Address, 0, "Connected"

End If

Function GetIP()

Dim ws : Set ws = CreateObject("WScript.Shell")

Dim fso : Set fso = CreateObject("Scripting.FileSystemObject")

Dim TmpFile : TmpFile = fso.GetSpecialFolder(2) & "/ip.txt"

Dim ThisLine, IP

If ws.Environment("SYSTEM")("OS") = "" Then

ws.run "winipcfg /batch " & TmpFile, 0, True

Else

ws.run "%comspec% /c ipconfig > " & TmpFile, 0, True

End If

With fso.GetFile(TmpFile).OpenAsTextStream

Do While NOT .AtEndOfStream

ThisLine = .ReadLine

If InStr(ThisLine, "Address") <> 0 Then IP = Mid(ThisLine, InStr(ThisLine, ":") + 2)

Loop

.Close

End With

'WinXP (NT? 2K?) leaves a carriage return at the end of line

If IP <> "" Then

If Asc(Right(IP, 1)) = 13 Then IP = Left(IP, Len(IP) - 1)

End If

GetIP = IP

fso.GetFile(TmpFile).Delete

Set fso = Nothing

Set ws = Nothing

End Function

How can i make javascript call a VB script (file.vbs) from clicking on a link in a HTML page

I have a windows 7 gadget that i want to call a external vbs file when the link is clicked.