Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.

Lv 32,322 points

Extreme Twist of Fate

Favorite Answers9%
Answers622

I used to go by the user name Breninja. I would like to thank all of the good users of the WS who should go down in history as WS Legends. King Kjors Air Sabu Age of the Rated R Superstar aka Age of Edge!(is over) Hannah Hardy Age of the Ripper SNITSKY (RAW) Cheezy Bottom Line Brian R Mag Mamzy Donovan T World Biggest Hardy Fan WWE Rulez I know that there are more that i'm forgeting, but you know who you are.

  • Remote unlock key for 2004 Matrix?

    Well, this is a funny story, and im not proud of it.

    I have had my permit for a while now, and today i started practicing parallel parking. Needless to say, i started out slow, but i improved, but was getting frustrated after a while. Well, i pulled up and started backing up, but turned to soon and almost hit my moms car. Then i did it again, and the same thing. My dad was getting frustrated, and i, for some reason, lost my cool and decided to quit for the day. My dad drives a 2004 matrix, and i had his keys, of course. I went inside and for some idiotic reason, i threw them on the ground. Well, the remote unlock thing(not sure what they're actually called) broke into like 3 pieces, and i could not get it working. My dad has 2 of these, so there is no hurry to get a replacement, but i was wondering what the cost of getting these replaced is. He has one already, but he would like to get a second copy. Im talking about a thing that goes on the key chain with three buttons for unlock. lock, and latch. I was just wondering how much this might cost me to replace?

    2 AnswersMaintenance & Repairs1 decade ago
  • Why do so many people disagree with everything Obama says?

    I'm a junior in high school, and i just moved to a new state last year. I moved from a mostly liberal area to now a highly conservative area. Since Obama got elected, all ive heard from the students in my school is "I hate Obama" and "Obama is a Nazi". I dont get where these people are getting that Obama is a nazi. Nazism is fascism, not anywhere near any ideas from Obama that ive heard of so far. These people here claim that they are not racist, but if you ask them why they dont like Obama they say "hes a socialist" or some other nonsense. They disagree with every single thing that Obama supports, whether they know about the topic or not. They are against health care reform, but even one of my conservative teachers cant tell me exactly why they are against health care reform or any other of his beliefs. In my mind it is pure racism, whether they want to admit it or not. My school was one of those schools who had an issue with listening to Obama's speech to students, which is ridiculous since both Regan and Bush Sr. did the exact same thing. Also, people in this area still claim that Obama was not born in the US, and that he is Muslim. Even if he was Muslim (which he is not) why would it matter? What happened to freedom of religion? Also, the idea that Obama was not born in the US is totally ridiculous. Why do people disagree with everything Obama says? Why do they want our President to fail? I never wanted Bush to fail at anything, even if i didn't like the way he ran things.

    9 AnswersPolitics1 decade ago
  • Slide in Disk Drive for new build?

    Im building a computer, and i got the idea of putting a dvd drive in where u slide the disk in the drive instead of having to eject the plastic part and put the cd or dvd on that. Like what mac laptops, the xbox 360, and the ps3 have. Its not a crucial part, but if anyone knows where i can find one i would greatly appreciate it.

    1 AnswerOther - Hardware1 decade ago
  • Which one of these processors is faster?

    Intel Core 2 Quad Q8200 Processor BX80580Q8200 - 2.33GHz, 4MB Cache, 1333MHz FSB

    http://www.tigerdirect.com/applications/SearchTool...

    OR.

    Intel Core 2 Duo E7500 Processor BX80571E7500 - 2.93GHz, 3MB Cache, 1066MHz FSB

    http://www.tigerdirect.com/applications/SearchTool...

    6 AnswersOther - Hardware1 decade ago
  • Core 2 Duo or Core 2 Quad?

    Im building a computer and i am wondering which processor i should use. I dont game all that much, but i do use multiple operations at once at times. Should i go to Core 2 Duo and take the extra money to get more Ram?

    6 AnswersDesktops1 decade ago
  • Will this Hard Drive work with this motherboard?

    Motherboard

    http://www.tigerdirect.com/applications/SearchTool...

    Hard Drive

    http://www.geeks.com/details.asp?invtid=WD7500AYYS...

    The motherboard has 6 sata ports, but at the bottom it says that the hard drive types it takes are UDMA/133, UDMA/100, and UDMA/66. I dont no what UDMA/... means. So would the sata hard drive i linked above work with that motherboard?

    4 AnswersOther - Hardware1 decade ago
  • Laptop having issues turning on?

    My laptop is a VAIO(2002ish i believe). Its worked fine up until now, but lately when i click the power button to turn it on, nothing happens. the lights come on, but the computer doesnt. After trying like 5 times it will come on and will run fine, But i feel that this is a serious issue. Ive checked the bios and the battery. I cant figure it out. Any help is appreciated.

    2 AnswersLaptops & Notebooks1 decade ago
  • Do network adapter cards work with a different companies routers?

    This may be a stupid question, but im just paranoid. I have a wireless router by linksys and once i bought a adapter card from belkin. The card did not work, but i think it was just a faulty card. Im just checking to make sure that if i bought a netgear wireless adapter card that it would work with my linksys router. Thanks for the help.

    3 AnswersAdd-ons1 decade ago
  • Motherboard to case size question?

    Im going to buy this case:

    http://www.geeks.com/details.asp?invtid=939PL&cat=...

    And i want to buy this motherboard:

    http://www.pacificgeek.com/product.asp?c=211&s=104...

    My question is since the motherboard is EATX will it fit in the case?

    7 AnswersDesktops1 decade ago
  • Creative plans for these people going into wrestlemania?

    CM Punk

    The Brian Kendrick

    Umaga

    William Regal

    Kane

    Rey Mysterio

    5 AnswersWrestling1 decade ago
  • Jeff Hardy's title hopes done for the time being?

    Jeff Hardy is on Smackdown, and with Triple H most likely going to Raw, that leaves the WHC as the only title for Jeff to chase. But can anybody here see Jeff holding the WHC? I just cant, i think that until he moves brands, jeff's title hopes are done.

    5 AnswersWrestling1 decade ago
  • My Wrestlemania XXV card?

    Undisputed Championship: Edge vs. HHH vs. Cena

    Orton vs. Vince w/ stipulation of some kind

    Jeff Hardy vs. Matt Hardy

    Shawn Michaels vs. Undertaker

    Ric Flair vs. Chris Jericho

    MITB-CM Punk vs. Kofi Kingston vs. Rey Mysterio vs. Evan Bourne vs. Kane vs. John Morrison

    USA Championship: Shelton Benjamin vs. MVP

    ECW Championship: Jack Swagger vs. Christian

    Some sort of Filler Match

    Some sort of Divas Match

    2 AnswersWrestling1 decade ago
  • ATX Motherboard that would fit in this case?

    Im looking for an ATX motherboard that would fit in a Modtek Alien-X Case.

    http://www.xoxide.com/xoxide-alien-x-case.html

    thanks.

    2 AnswersDesktops1 decade ago
  • BIGGER NEWS THAN CHRISTIAN!!! *SPOILER WARNING*?

    On Impact this week, Petey Williams lost a loser leaves town match, and instead of being part of a storyline, he is ACTUALLY BEING RELEASED! Why would TNA throw away there best X-Division superstar(in my opinion), and how will Petey go to WWE?

    8 AnswersWrestling1 decade ago
  • Is WWE undermining Finlay's abilities?

    Finaly will be turning 51 this year, and he has only held 1 WWE Championship(The US). Finlay is the most technically skilled wrestler WWE has. So why hasnt he been World Champ? I think the WWE should turn him heel, and have him go to RAW and win the WHC, just for a little while. He has trained the young wrestlers for so long, i think that it is time for WWE to realize that he deserves a title. I dont care if he has it for a week, he just deserves a reign as champ. Thoughts?

    14 AnswersWrestling1 decade ago
  • Size for a website background?

    i am designing a background for a website, but i need to no what width and length to use. What size would fit it with no repeating?

    4 AnswersProgramming & Design1 decade ago
  • Overlapping Images with HTML?

    i have 3 images, i want to have one on the left, one on the right, and a center one overlapping both of the images on the sides slightly. Can anyone give me an html code for this situation?

    Note: i have edited the images to have transparency.

    2 AnswersProgramming & Design1 decade ago
  • Jeff Hardy hit and run possibility?

    I think that much like the storyline with Kane and the burlap sack, with so many people saying that they no who is going to be the secret attacker of jeff hardy, do u think WWE will change the storyline from Christian Cage being the attacker into having Matt Hardy being the attacker, resulting in a heel run for matt?

    12 AnswersWrestling1 decade ago
  • Is DH Smith going to be in Randy Orton's group?

    With Sim Snuka and Manu gone, and Ted Dibiase out of action, is DH Smith going to move to Raw and be one of/ the choice of Randy Orton? Even more so since DH Smith hasnt been used in a long time, and WWE isnt stupid enough to let a Hart go, wouldn't it make sense for Smith to go to Raw?

    11 AnswersWrestling1 decade ago
  • How to embed a .wmv file into a webpage directly?

    ive been trying for sometime now, but every time i try the player comes up, but the video doesnt. It just says 0:00/0:00 stopped. The latest code i tried was:

    <OBJECT ID="MediaPlayer" WIDTH="192" HEIGHT="190" CLASSID="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"

    STANDBY="Loading Windows Media Player components..." TYPE="application/x-oleobject">

    <PARAM NAME="FileName" VALUE="SUPERCRAZYFIREWORKS.wmv">

    <PARAM name="ShowControls" VALUE="true">

    <param name="ShowStatusBar" value="false">

    <PARAM name="ShowDisplay" VALUE="false">

    <PARAM name="autostart" VALUE="false">

    <EMBED TYPE="application/x-mplayer2" SRC="SUPERCRAZYFIREWORKS.wmv" NAME="MediaPlayer"

    WIDTH="192" HEIGHT="190" ShowControls="1" ShowStatusBar="0" ShowDisplay="0" autostart="0"> </EMBED>

    </OBJECT>

    What did i do wrong? Any help is greatly appreciated.

    4 AnswersProgramming & Design1 decade ago