Matt

..If the instruction manual of an electric meter states this...

"The reverse energy warning message is triggered when

the reverse power exceeds a programmable threshold level of between 1- 10 Amps for a period of 10Wh. Once this level is reached the message below will be displayed which can only be reset via the IEC 1107 port"

Lets say the the meter was set to trigger at 1Amp for a period of 10Wh...

Would a set of solar panels producing just 200watts all day back through this meter set this trigger off?

If the instruction manual of an electric meter states this...

"The reverse energy warning message is triggered when

the reverse power exceeds a programmable threshold level of between 1-

10 Amps for a period of 10Wh. Once this level is reached the message

below will be displayed which can only be reset via the IEC 1107 port"

Lets say the the meter was set to trigger at 1Amp for a period of 10Wh...

Would a set of solar panels producing just 200watts back through this meter set this trigger off?

Before I buy the game, I want to know if the zombies map Der Reise (from cod waw) is available for black ops 2?

I'm looking for a Z bracket similar to the one on this page but preferably around 10cm high.

http://www.alibaba.com/product-tp/123790895/Z_Shap...

I cant find a UK supplier anywhere

I have my multimeter within the ciruit while attaching a cigarette lighter extension (with small light inside). My multimeter dial is set to 10A and it reads 0.08 on the digital display. How many milliamps or Amps is this?

0.8 Amps or 0.08 Amps?

and

80 milliamps or 800 milliamps?

Thanks

I have an 110ah deep cycle marine battery and stupidly allowed it to go down to 11.88 volts under load. So I disconnected all devices and used my AC charger which did a bulk charge for a few hours at 13.5v thenswitched to maintenance charge for a remaining 3-4 hours. After disconnecting, I waited 12 hours before testing again with the multimeter and it reads 12.68v . Is this considered normal for a healthy battery, or does this mean its just not holding its charge very well?

Many thanks

I have a 110Ah marine battery showing a voltage of 12.40 volts with no load. If my solar panels charge 1Amp of current for exactly 1 hour (1Ah), what voltage would the battery read afterwards? (after the charge has completely settled)

I guess Im trying to work out if there is a formula for voltage reads vs amp hours available in a battery (if this is even possible)

Cheers

I have a couple of solar panels leading to a battery and the wires are your standard red/black type which I feel need some added protection from the elements. How can I protect them without cutting them or taking the croc clips off? They are currently laid between concrete slabs in the back garden (the gap between slabs is a good 5-10mm wide, handy!). Is there any clever sleeving out there for the job?

Cheers

Matt

I used a multimeter to test the DC voltage of my 12v 4.8 watt solar panel. I set the multimeter to DC Volts. I was surprised when the reading came out at 22.8 ! Is this what should be expected?

It was a cool, cloudless sunny day so perfect conditions

Cant find how many points I have? Where is it on the website?