Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
85 Suzuki Intruder: doesn't the rad fan have a fuse?
750 cc I think I am overheating because the fan isn't coming on. No fuse listed in my fuse box on side panel. Switch/electrical? It spins freely by hand. Internet doesn't tell me much. My manual is at home, I am not. (have to search uner 87 Intruder for parts info etc)
It was boiling and spit out a bit of rad fluid from the overflow when I stopped. Fluid was right full when I left. No idiot light came on.
(No one is open today because it is Canada Day)
Thank you smart motorcyclers!
3 Answers
- ruletheworldLv 41 decade agoFavorite Answer
Well, I already know from your question that you DON'T need to be told about your rad fluid, and you probably know how it works, and knowing how it works is not going to give you much help on why your fan isn't running.
It probably doesn't have it's own seperate fuse on the panel, obviously if it isn't listed. It may run off the main power fuse. There could be an electrical switch out, but most likely it is the thermostat. Especially if your temp light didn't come on.
It is not telling the fan to come on because it is not registering the temperature properly. This you will not be able to just do a quick fix on. It's a little tricky to get at.
The shop has PROPER ways of testing the electrical and the motor. I wouldn't be messing around with checking the wiring unless this is something you normally do.
Good luck getting home. You shouldn't ride it unless it is very cool outside.
- webmanLv 42 decades ago
When you stop on a hot day, for a few seconds the coolant gets super heated because the pump isn't moving it so it will expand a slight amount and some will be forced out. From the age of the bike, it is possible the coolant cap isn't holding enough pressure in the system or there isn't enough anti freeze in it. Both these things keep the boiling point higher to prevent it from boiling over.
Source(s): diesel mechanic and motorcyclist. - Anonymous2 decades ago
i think there is fuse check all the fuses to see if any are blown if not find the hot wire and ground wire put power to the hot wire se if the fan runs