Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
Should you ever use engine flushes?
Can they be harmful? Are they any good? Is there a best one to use?
7 Answers
- 1 decade agoFavorite Answer
Never use an engine "flush."
Instead use a fully synthetic oil.
This is what Castrol oil means by "Un-lock the power"
After your first oil change of using synthetic oil, it will clean out the conventional oil.
Thus also why it cost more for synthetic oils.
- Robert MLv 71 decade ago
Yes, you should use an engine flush if you have been naughty and used conventional oils or waited too long between changes. There are many on the market. The best one I've ever used and I enodrse this personally, is butyl cellosolve. What kind of engine are we writing about here?? It makes a difference. Also, the age and mileage is importatnt, too. Remove your oil filler cap and flip it over. Is it dark brown or gooey or flaky or dry? Whatever you see here is exactly what the entire inside of your engine will look llike. Just changing oil will never remove any deposits that are already built up inside. They should be removed chemically. Worst case scenario, dissassemble engine, clean, and re-assemble. Driving your car with butyl cellosolve in it for two days will usually remove just about anything. Your filter will pick up the dislodged crud, and the engine will be prepared for the installation of a good synthetic oil, like Mobil One. You can find butyl cellosolve at a Mercury boat store under the name "Power Tune". It is thorough and gentle at the same time. Good Luck.
- catmandewLv 71 decade ago
Some of that stuff is just "Snake-Oil" and can do damage. DO NOT USE KEROSENE. If your oil is already low, or if you drain some out, put up to 1 Quart of Automatic Transmission Fluid in for a while before an Oil change. It's very similar in composition to oil, but has a higher detergent level which will help clean out varnish and sludge.
Edit; You are talking Oil, right? If you mean coolant, use Prestone flush.
Source(s): ASE Certified Tech. My Engine rebuilding teacher in school told me, and I've been doing it for 20+ years with great results. - 1 decade ago
Engine Flush =Gasket warper/dissolver.
We used to fill the crankcase to the full mark on the dipstick with kerosese and idle it til it got hot and then drained it and put in fresh oil and filter.
- How do you think about the answers? You can sign in to vote the answer.
- Anonymous1 decade ago
your talking about motor oil flushing?. you can flush out the crankcase, if your engine isnt too dirty, but if its pretty dirty, you should take the oil pan off and clean it out, preventing the oil pump to become clogged.i used it before, i found (gunk)is pretty good.
- Mr. TLv 71 decade ago
If you change your coolant every five years, & flush it with fresh water, install new antifreeze, you'll never need engine flush chemicals.
»»»
Source(s): Mechanic - 28 Years - 1 decade ago
Haha, they are not nessesary, look it up online, you will find its a waste of money. Your service advisor gets xtra cash when they sell you one.
Source(s): have worked in many diffrent service departments over the past 6 years