i would like to install a 700r4 in my 1994 chevy 2wd to replace the 4l60 what would i have to do?

700r4 and 4l60 are the same transmission.Gm changed the name in 1990 to 4l60.There should be no difference.

to no longer be a jerk, yet once you're asking those questions approximately a yahoo answer communicate board you probable should not be project this project. yet once you sense waiting, you may desire to apply the 700r4 trans by way of fact the 4l60e is compelelty electronically conrtolled and you may desire to purchase a stand by myself computer for that trans to artwork, no longer nicely actually worth the money or attempt on your utility. you're putting in a carbed 350, so pull out the facorty harness decrease than the hood as you will no longer use any of the sensor wires. the only wires you will want would be oil sender, coolant temp, electric powered choke if utilising one, potential twine for distributor, tach twine, and alternator wiring, and a/c in case you desire to maintain it. you may get a serpentine equipment for it, massive greenback although. They make physique substitute motor mounts, a radiator, and custom headers. you will would desire to dimple the firewall slightly to sparkling the back of the distributor and the brake booster wont be a difficulty. Get all your solutions and aspects regarded after out earlier hand to make advantageous u can handle the project. stable success

You should be able to mount it, but they are both computer controlled transmissions. You might want to check with a Chevy dealor to make sure the electronics are compatible.

I'm pretty sure their very close on length so the driveshaft should be alright, and the mount should be the same.