How do I rack a diamond for 9-ball using a standard 8-ball triangle?

"How To Rack For 8 And 9 Ball

A rack is the name given to a frame (usually wood or plastic) used to organize the balls at the beginning of a game. The most common shape of a physical rack is that of a triangle, with the ball pattern of 5-4-3-2-1. Racks are sometimes called simply "triangles" (most often by amateur shooters) based on the predominance of this form. Triangular-shaped racks are used for Eight-Ball, Straight Pool, One-Pocket, Bank Pool, Snooker and many other games. Although diamond-shaped racks, with an intended pattern of 1-2-3-2-1, are made for the game of Nine-Ball, the triangular rack is more often employed in Nine-Ball as well.

There is often argument over whether there is a proper way to rack the balls for an Eight-Ball game. While there is no particular method for the balls to be placed aside from the 8 (for an Eight-Ball game) and 9-ball (for Nine-Ball game), it's best to follow these simple methods.

When racking for an Eight-Ball game, set the rack on the table and place the one ball in the top corner. Place two balls beneath the one ball. In Eight-Ball, fifteen object balls are used. Standardized rules state that:

* The 8-ball must be in the center of the rack (the second ball in the three balls wide row).

* The first ball (traditionally but not mandatorily the 1 ball) must be placed at the apex position (front of the rack and so the center of that ball is directly over the table's foot spot).

* The two corner balls must be a stripe and a solid. In theory, this pattern allows for a more equal chance of sinking both a solid and a stripe because the two corner balls are the most likely balls to be pocketed on the break.

* All balls other than the 8-ball are placed at random, but in conformance with the preceding corner ball rule.

* The balls should be pressed tightly together without gaps, as this allows the best break possible.

In amateur Eight-Ball play a racking variant that is often followed is:

* The outer edges of the triangle must be in the pattern of solid, stripe, solid, stripe, etc. (resulting in the two corner balls being either both stripes or both solids).

* Sometimes, the balls must be placed in numeric order from the top of the triangle down and from left to right, i.e., the 1 on the foot spot, followed by the 2 then 3 in the second row, and so on. This always results in the corner balls of the rack being both stripes (the 11 and 15, respectively).

The game of Nine-Ball has a totally different system of racking since you are only playing with nine balls. While you may use the same rack that you do in Eight-Ball, they do sell special racks for nine-ball. The balls are racked in the shape of a diamond. Be sure to place the 1-ball at the upper point and the 9 in the middle. Some players (most often amateurs) place the balls in numeric order but for the 9 ball; from the top of the triangle down and from left to right, i.e., the 1 on the foot spot, followed by the 2 then 3 in the second row, and so on. However, all balls other than the 1 and 9 may be randomly placed.

Regardless of what variation of the game you are racking for, it is always best to make sure it is a "tight rack". This refers to the spacing between the balls. Ideally, you would want the least amount of space. Now, be sure to roll the rack so that the 1 ball is exactly in the middle of the pool table "dot" on the billiard (pool) table. Use all eight of your fingers--not your thumbs--and push on the back roll of balls, forcing them tight in the Eight-Ball rack and making sure that the 1 ball is placed in the middle of the pool table "dot." This is very important, since it is difficult for your opponent to make a ball on the break if he's shooting at a "tight rack." "

http://billiards.infosegment.com/how-to-rack-for-8...

This Site Might Help You.

RE:

How do I rack a diamond for 9-ball using a standard 8-ball triangle?

Nine Ball Rack

9 Ball Setup

put the 6 balls your not using in the bottem 2 corners so you make a diamond. then when you set up for 9-ball you can just take off the triangle and roll the 10-15 away and you have your diamond

Sancira, you have way too much info and some of it sucks.

If I get a real tight rack in 9 ball i will almost always make at least one ball on the break.

Brew and Tyrone got the right idea, and Tay's way sounds good for amateurs and people or kids with smaller hands and fingers, never thought of that Tay

1 ball in front and 9 ball in the middle, for a diamond and hold it with your hands when you push it up to the spot. Nothing to it.

1

x x

x 9 x

x x

x

The one ball is in the middle on top, 2 balls after that, then 3 with the 9 ball in the middle of that, 2 balls next, then 1 ball in the middle at the bottom.

9 Ball Rack Setup

I just stick my fingers against the balls while palming the corners of the rack to keep the balls in place.It took me a few practice trys but that should work.