Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
Compressed natural gas can be used as a fuel and can you directly use it to a combustion engine ?
Gas prices here is so expensive now 4$ a gallon it would be much cheaper if I used natural gas. and I want to experiment my experimental engine for testing. by putting pressure regulator to the tank of compressed natural gas and directly connect it with the intake manifold by a hose.
Is there other modification to the engine aside this
11 Answers
- Anonymous1 decade agoFavorite Answer
Yes! Modify your engine with a burn unit and an EKG!
Dude! Auto engines that run on natural gas are SERIOUSLY modified by PROFESSIONALS! You do not have the knowledge or capability to do it on your own.
- 2n2222Lv 61 decade ago
If you happen to have compressed natural gas, it would probably work just fine. You'd have to fool with it to get the mixture correct for the various throttle settings; there are carburetor kits available that'll do this for you.
Note that compressed natural gas is not the propane you use for your backyard grill. Compressed natural gas requires an elaborate refrigerated tank because it's made of methane, which doesn't liquify so easily. Propane is far better behaved, and you can run a car on it as well.
Note that you probably won't save a dime with either of these gases. They're both expensive, and you'll eventually want to pay your fuel tax before the authorities catch up with you.
- campbelp2002Lv 71 decade ago
Yes, compressed natural gas can be used (and has been used) directly. Only minor changes are needed to the engine to use natural gas.
- JOHNNIE BLv 71 decade ago
Not quite that simple . First natural gas will only compress a little and it becomes like trying to compress water.. The tank is very large.
- How do you think about the answers? You can sign in to vote the answer.
- DesperateLv 41 decade ago
I'm studying chemistry and I can't see anything wrong with it. As far as hydrogen goes its too expensive and hard to capture and facilitate. I would be more confident w/ a liquid in my car. I don't know anything about engines or natural gas. Keep at it and keep at it I guess... Good luck and best of safety! Also, I thought about biodiesel buts that the worst $!
- Kim RLv 71 decade ago
I don't know how to convert it. My 2 natural gas-powered cars were made in the factory by Ford in 1999 and 2000. You're right, it is WAY cheaper than gasoline, and cleaner for the environment, too. Check eBay and see if you can snag one for yourself. It's a lot easier than trying to do a conversion without knowing how!
Source(s): www.cngchat.com - Anonymous1 decade ago
You have a different type of regulator, to replace the carburator, /fuel injection, .East Ohio Gas Co. has all of thier vehicles running on Natural gas.
- Anonymous1 decade ago
it has been extensively in industrial applications for decades. fork lifts and some trucks use compressed gas. burns clean and about the same cost as gasoline. hard to choose which way the infrastructure should be changed to replace gasoline. the solution has everybody stalled with indecision. hydrogen is another way. you decide.
- 1 decade ago
i would try with a carburated engine first....seems like a fuel injected engine would need a lot of reprogramming on the ecm