How tight should the tank be attached to the toilet?

I've always snugged the tank until it just touches the porcelain and never had one break (I've installed hundreds of toilets). If you're concerned, you can put rubber at the contact points & snug until that touches.

If you don't snug it all the way down, the tank will rock on the bowl.

Gaijin knows better than I do and others may help more. My experience is usually limited to, well, if it works, don't mess with it. In general, if there is no leak at the gasket, snug things up and don't overtighten.

Gaijin mentions rotating the gasket which may be a good idea. Since you're a good DIY, all it would cost you is to shut off the water, drain the tank and go again tightening carefully. Good idea Gaijin.

Just from my experience (house full of people, kids), if you try it again, maybe start from the wall side and try drawing it to the front but don't go too far past comfortably snug without reason.

By the way, parallel to the wall (tank) does not necessarily mean perpendicular to the floor (the bowl.).

I've had to tweak things many times, mostly due to the grandkids practicing their potty training or crawling all over the toilet to play in the sink.

By the way, after the kids, I've been able to get away with a piece of packing foam taped to the back of the tank to keep it square. It's easier to shim it out from the wall than the other way.

Since it's working... is it awkward or comfortable to sit on? If it's okay, just tape a piece of styrofoam between the wall and the back of the tank. Works for me.

Hopefully, an experienced plumber can provide better advice. I tried.

The system needs to breathe, The septic doesn't have to be vented itself to work, but the system does. This is why houses have vents through the roof, they are vented always uphill of the drains. If this cabin has a space where you can get to the pipes, splice in or tee into the line in which the toilet drains into and run a 1 1/2" or 2" line out and up the side of the cabin because at times when it vents the smell will come out. They make flapper vents which some put on sinks to do this, but for this situation it would smell. Will cure the problem. Most septic tanks vent through the roof this way, or there would be a standpipe in the yard.

American Standard Toilet Tanks

Ran into the same problem except mine is against the wall,not tilted forward.Couldn't get the tank flush with the bowl surface so brought it down to what I thought was safe.If it loosens later,can always tighten it some more.the tank tilting forward isn't good.leaning against it over time will loosen it.Wonder if you can spin the gasket 180 degrees,might level the tank so it's against the wall.The plastic piece that goes through the gasket could be crooked or the hole that it sets in isn't kosher.

Try rotating the gasket under the tower 180 and if that doesn't work think of it like this. You can tighten a bolt for free once a week when you do your thorough bathroom cleaning. Can you afford a $300.00 Toilet again?

It is essential to potty train your youngster when just before he begins going to school. It is needed for them to keep away from undesired accidents at college. Several colleges and day cares of the present day times neglect Those youngsters who are not entirely potty skilled so if you want to understand how to potty train your child in only 3 day you will require this https://tr.im/EDPb1

Start Potty Training by Carol Cline comes with a quantity of various potty training PDFs, video presentations that the parents can go via to support them swiftly and easily educate the successful toilet training approach to their kid.

The very first 6 chapters of the plan include background of potty training along with the approaches to put together for the process. It also contains the details about the proper age of your little one that is perfect for commencing the potty training. It also discusses the indications that you must notice in your youngster to realize if he or she is ready for the same or not.

I have noticed the same thing with American Standard toilets. The instructions say to tighten it until the porcelain touches, but I stopped because I m afraid its going to break.

sounds like you just have to loosen front tank bolts and re tighten back ones until level . The tank & bowl don't need to be touching , just so the tank feels sturdy and cant be twisted it will be fine !

1