what is a faraday cage?

here you go;.....

A Faraday cage, or Faraday shield, is an enclosure formed by conducting material or by a mesh of such material. Such an enclosure blocks out external static electric fields. Faraday cages are named after the English scientist Michael Faraday, who invented them in 1836.[1]

A Faraday cage's operation depends on the fact that an external static electrical field will cause the electrical charges within the cage's conducting material to redistribute themselves so as to cancel the field's effects in the cage's interior. This phenomenon is used, for example, to protect electronic equipment from lightning strikes and other electrostatic discharges.

Faraday cages cannot block static and slowly varying magnetic fields, such as Earth's magnetic field (a compass will still work inside). To a large degree though, they also shield the interior from external electromagnetic radiation if the conductor is thick enough and any holes are significantly smaller than the radiation's wavelength. For example, certain computer forensic test procedures of electronic components or systems that require an environment devoid of electromagnetic interference may be conducted within a screen room. These screen rooms are essentially work areas that are completely enclosed by one or more layers of fine metal mesh or perforated sheet metal. The metal layers are grounded to dissipate any electric currents generated from the external electromagnetic fields and thus block a large amount of the electromagnetic interference. See also electromagnetic shielding.

Note that the reception of external radio signals, a form of electromagnetic radiation, through an antenna within a cage can be severely reduced or even totally blocked by the cage itself.

Operation;

An external electrical field causes the charges to rearrange, which cancels the field inside.A Faraday cage is best understood as an approximation to an ideal hollow conductor. Externally applied electric fields produce forces on the charge carriers (usually electrons) within the conductor, generating a current that rearranges the charges. Once the charges have rearranged so as to cancel the applied field inside, the current stops.

If a charge is placed inside an ungrounded Faraday cage, the internal face of the cage will be charged (in the same manner described for an external charge) to prevent the existence of a field inside the body of the cage. However, this charging of the inner face would re-distribute the charges in the body of the cage. This charges the outer face of the cage with a charge equal in sign and magnitude to the one placed inside the cage. Since the internal charge and the inner face cancel each other out, the spread of charges on the outer face is not affected by the position of the internal charge inside the cage. So for all intents and purposes, the cage will generate the same electric field it would generate if it was simply charged by the charge placed inside.

If the cage is grounded, the excess charges will go to the ground instead of the outer face, so the inner face and the inner charge will cancel each other out and the rest of the cage would remain neutral.

The effectiveness of a Faraday cage or shield is dependent upon the wavelength of the electric or electromagnetic fields it is intended to shield. Effectiveness of shielding also depends upon the types of metals used in the cages as well as their thicknesses.

hope it helps.......