How would you clear the code E-3 from a Canon Pixma MP190 printer?

Try this first:

--------------------------------------

E-3

Cause: If the Paper Output Tray is closed or not opened fully, open it fully. The machine resumes printing.

Solution: If opening the Paper Output Tray fully does not resolve the problem, the paper may be jammed. Remove the jammed paper, reload paper properly in the machine, and then press the Black or Color button.

--------------------------------------

If it is still having a problem follow these steps to reset the device.

--------------------------------------

Issue: ERROR LED: E, 3

Solution: Press ON/OFF switch to reset the multifunction device

Reset the device when it is not functioning properly.

If the device is not functioning properly or to clear memory, reset it.

1. On the operator panel, press and hold the <ON/OFF> button for one second. (The display will go blank.)

Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer.

2. Wait approximately ten seconds and then press the <ON/OFF> button again.

3. Wait until the device has completed its cycling process before submitting another job request.

--------------------------------------

If it still is not fixed after that your printer will have to be serviced.

--------------------------------------

Reset Canon Mp190

press and carry down the provide up/Reset button (on backside good hand area of printer) for a minimum of 5 seconds till the demonstrate reads a million lower back. This bypasses the ink point detector and is defined interior the situation capturing portion of the on demonstrate handbook presented on the printer installation CD.