What would be a good amp for 2 Rockford P3 15's 4 ohm? and how would you wire it?

You can wire them at 4 ohms or 1 ohm an amp that would be good if wired at 1 ohm is a 1 ohm stable amp that puts out 1000 watts at 1 ohm if not then you'll need to find an amp that puts out 1000 watts @ 4 ohms wich would be pricey

2 ways you can wire this either 4 ohm load or single ohm load. at 1000 watts RMS.

P3's are 500 watt RMS/1000 watt Peak

I would go with single ohm load because the lower the ohm the batter the sound will put out. http://www.sonicelectronix.com/item_29838_MTX-Audi... check it out.

or get the Memphis MC1.4000 Mojo Amplifier if you want to wire it at 4 ohm load at 1000 watts RMS. you could get 2 more P3's and wire it at single ohm on this amplifier on 2 separate terminals makes it wiring 4 subs at 2 Ohm load.

This one is the best.

Rockford Fosgate Prime R500-1 500 Watt Mono Amplifier

Technical Details

* Mono amplifier delivers 500 watts at 2 ohms, 350 watts at 4 ohms

* Variable low pass crossover with 12dB/octave slope and 40Hz to 130Hz crossover point

* Punch Bass adjustable bass level control of 0 to +12 dB centered at 45Hz

* RCA inputs for signal level input and pass-through jacks for system building

* The input gain control is preset to match the output of most source units