Yahoo Answers is shutting down on May 4th, 2021 (Eastern Time) and beginning April 20th, 2021 (Eastern Time) the Yahoo Answers website will be in read-only mode. There will be no changes to other Yahoo properties or services, or your Yahoo account. You can find more information about the Yahoo Answers shutdown and how to download your data on this help page.
Trending News
adhesive for cultured stone?
I am to apply approx. 60 sq. ft of cultured stone on a new fireplace. The frame is 2X4, with 1/2 inch plywood. I do not want to use the standard mesh w/ mortar. I want to use some of the upper grade adhesives. (PL premium) I may be able to actually remove the panel, apply the stone w/ adhesive, let it dry, then lift w/ help and screw back into the 2X4 frame with coated screws. Anyone offer advice of this way of application??
Well, it went well. I left the plywood in place. The stone was easily set with liberal amounts of adhesive. I used 5 large tubes for the first fireplace, about 40 sq ft. I held the blocks in place with 2 1/2 inch screws, to wedge them and act as a support to keep them from slipping. Dried overnight and was very secure in the AM. Ready to start filling the gaps with mortar. My wife and I did the job in 5 hours. I'm sure that a professional would take 2-3 days to do this, at $300-400 a day. I am very happy with the ease and results.
3 Answers
- rob sLv 71 decade agoFavorite Answer
Yep... Don t do it that way. The lifting and the flexing you ll get in lifting , if you could possibly lift it at all ,will break the bond on the mortar/ adhesive. If you don t want to do the wire mesh method with a scratch coat, there are adhesives that will bond the cultured stone to a cement board that can be added over your 1/2" plywood.
Any questions you can e mail me through my avatar..GL
Source(s): 20 years in flooring as a store owner/installer - Anonymous1 decade ago
i dont understand why you want to make a relatively easy procedure that much harder...
